14
Residents know what to do so that the well does not freeze even in the most severe cold: a reliable method
The real cold is on its way. We urgently need to take care of The well didn't freeze in winter. This life hack is suitable not only for a water source, but also for any other container or septic tank. Let's try to find the best solution in this situation so that we don't run around looking for help.
In winter, who will not remember the moment? discharge from various containers before severe frosts strike. Why is this so stressful for the owner or driver? The reason is simple. If you do not remove the water in time, the frost will turn it into an ice block. And this block is able to destroy any container, because because of the frost it expands significantly.
Severe frosts seriously threaten any container that is filled with water. You'll probably remember a story where the cold was ruined by someone's car or heating system. This is a sad situation, which is why it is necessary. consider all possible risks. Get acquainted with our life hack, maybe one day you will need it.
A useful trick to make such a shieldingYou will need the following things: plastic bottles, river sand, rope, a small bar or pipe. The scheme of building this know-how is also quite simple, but it should be done on the street. Warm and cold temperatures can spoil the whole mechanism.
So, which bottles to pick? It is believed that you can give preference to both five-liter bottles and smaller containers. But if the frost promises to be cracking, then perhaps the five-liter capacity wins this race. Put the sand in the bottle halfway The total amount so that the rest of the space takes up air.
Next, seal the lid of such a bottle and fasten the rope on top. Choose a wooden timber or metal pipe so that it easily fits on top of the general structure (well, septic tank, plastic vat with water) and can sand bottle. Make sure that the bottles are submerged only at the level of the sand layer.
The principle of operation of our homemade unit is to prevent freezing of the liquid and theoretical destruction of the container in which this liquid is located. Thanks to the air in sand bottles, it is created. slight resistanceIt won't leave a cold and a chance. The trick is very simple, so you can easily experience it at your own cottage.
But even here there is a slight nuance. If the minus mark decides to step over the number 20, then the life hack with bottles may not work. Nothing can be done, these are harsh realities. In order to prevent unnecessary worries about your own well or pipes, through which water enters the house, it is better heat up.
We suggest not to be distracted by thoughts "if the well did not freeze in winter." We model a situation where this has already happened. What should we do then? Carefully examine the well and visually determine thickness. If it is not too large, you can try to break the ice edge with a metal bucket. This needs to be done very carefully. Of course, it is not forbidden to use other metal objects, but there is a risk of damage to the elements of the hoses or the pump, which is located in the well.
What to do if it is formed ice-layer? The metal bucket here is clearly not an assistant, because it will only roll on the surface. Various heating devices will come to the rescue, which after a while will heat the ice and melt it. Try to insulate the well from the ground, and then start fighting the ice with a heating shade or a construction hair dryer.
A frozen well in winter is the result of improper construction of the entire structure. It is believed that the water should not be too close to the ground, because then it will easily freeze every winter. Sure. study the necessary informationbefore proceeding with the construction or insulation of the well. We hope that such an annoying problem will not bother you in the cold season.
In winter, who will not remember the moment? discharge from various containers before severe frosts strike. Why is this so stressful for the owner or driver? The reason is simple. If you do not remove the water in time, the frost will turn it into an ice block. And this block is able to destroy any container, because because of the frost it expands significantly.
Severe frosts seriously threaten any container that is filled with water. You'll probably remember a story where the cold was ruined by someone's car or heating system. This is a sad situation, which is why it is necessary. consider all possible risks. Get acquainted with our life hack, maybe one day you will need it.
A useful trick to make such a shieldingYou will need the following things: plastic bottles, river sand, rope, a small bar or pipe. The scheme of building this know-how is also quite simple, but it should be done on the street. Warm and cold temperatures can spoil the whole mechanism.
So, which bottles to pick? It is believed that you can give preference to both five-liter bottles and smaller containers. But if the frost promises to be cracking, then perhaps the five-liter capacity wins this race. Put the sand in the bottle halfway The total amount so that the rest of the space takes up air.
Next, seal the lid of such a bottle and fasten the rope on top. Choose a wooden timber or metal pipe so that it easily fits on top of the general structure (well, septic tank, plastic vat with water) and can sand bottle. Make sure that the bottles are submerged only at the level of the sand layer.
The principle of operation of our homemade unit is to prevent freezing of the liquid and theoretical destruction of the container in which this liquid is located. Thanks to the air in sand bottles, it is created. slight resistanceIt won't leave a cold and a chance. The trick is very simple, so you can easily experience it at your own cottage.
But even here there is a slight nuance. If the minus mark decides to step over the number 20, then the life hack with bottles may not work. Nothing can be done, these are harsh realities. In order to prevent unnecessary worries about your own well or pipes, through which water enters the house, it is better heat up.
We suggest not to be distracted by thoughts "if the well did not freeze in winter." We model a situation where this has already happened. What should we do then? Carefully examine the well and visually determine thickness. If it is not too large, you can try to break the ice edge with a metal bucket. This needs to be done very carefully. Of course, it is not forbidden to use other metal objects, but there is a risk of damage to the elements of the hoses or the pump, which is located in the well.
What to do if it is formed ice-layer? The metal bucket here is clearly not an assistant, because it will only roll on the surface. Various heating devices will come to the rescue, which after a while will heat the ice and melt it. Try to insulate the well from the ground, and then start fighting the ice with a heating shade or a construction hair dryer.
A frozen well in winter is the result of improper construction of the entire structure. It is believed that the water should not be too close to the ground, because then it will easily freeze every winter. Sure. study the necessary informationbefore proceeding with the construction or insulation of the well. We hope that such an annoying problem will not bother you in the cold season.
The baby spontaneously washed the down jacket, he terribly lost, but the grandmother was able to return him to the divine appearance.
Detailed forecast of the Chinese expert Kevin Fung for all signs on the Eastern horoscope