My father taught me how to handle a Bulgarian woman deftly, now I do everything in the country by myself, without waiting for my husband.

How do you cut with a Bulgarian? The answer to this question knows, perhaps, almost every master of all trades. But the Bulgarian or corner grinder (USM) is an extremely important tool. traumatic. It is necessary to work with it very, very carefully, because there is a risk to get acquainted with the entire trauma or surgical department of the nearest hospital. So how do you interact with this tool correctly?



What master craftsman will listen to others or read instructions? He knows everything. He doesn’t need protective clothing or special glasses. After all, as the boy Vova from the cartoon “Vovka in the Trinity Kingdom” said: “And so it will come down!” But jokes aside. Working with a corner grinder requires appropriate clothing, a head shield, durable gloves. All clothing should be designed specifically to work with spark-forming tools and protect the employee with a Bulgarian.



Saving on personal protective equipment when working with CSM is simply unwise, because your health is at stake. Specialists who prescribed such recommendations for working with a Bulgarian woman did not take them from the ceiling. These rules are written based on all possible situations that may have happened before. And it didn't always go well. Be sure to use all elements of protective equipment. It has to be. hedge in a critical situation.



Controversial moments Master divided into two camps and argue about how to cut. Should the sparks fly away from themselves or towards themselves? If you cut with sparks from yourself, then there is a possibility of a better view of the place that you need to saw. But at the same time, this method increases the risk of tearing the corner grinder from the place, which is fraught with injuries for the employee. Where's the truth?

First, before work, you need to carefully study the manual for the specific model of your Bulgarian. The tools are more and less powerful, which is also important to consider in the work. The manufacturer is obliged to describe in detail each stage of work with the tool. Second, don't forget your workwear. Its use should be mandatory.

Most craftsmen believe that cutting something with an angle grinder is necessary so that sparks fly in your direction. You should be protected from them with workwear. But in the case of a bite of the disc, the Bulgarian can simply snatch from his hands. In this case, it should be thrown forward by inertia, and the master should step back. The risk of injury is reduced.

Moreover, the disk in the process of work can simply burst. In order for its debris to not fly into you, the disk must be closed with a special clamping. Do not forget that any part of the body should not in sight of the Bulgarians. This will also save you from potential injuries.



A rather serious question: is it possible to use special disks and cut a tree with a Bulgarian? Professionals shout with one voice: "No way." They argue that there are many other options for working with wood. Gasoline or circular saws are less dangerous and more effective.

Wood is a heterogeneous material, which contributes to the bite of the Bulgarian disc. And this is fraught with unusual situations and injuries. Craftsmen believe that discs on wood with special teeth are no more than marketing. It is better not to take risks and work in more rational ways.



The correct option How to fasten the clamping nut on the UMS? Experts explain that the nut has its cylindrical shape for a reason, on the one hand of which there is a small indentation, and on the other - a bulge.

The inner washer of the Bulgarian also has a small bulge, on which the disk is attached. The nut should be twisted with a depression to the disk if the disc is thin. This will prevent the disc from freely chatting. Well, if the disk is thick, then the nut should be attached with a bulge to it. It will create. centre-up.

And which side is better to install the disk and should it be further tightened? These points must be spelled out in the manual for the operation of the USM. Most put the disc face up, because it is more attractive and the wizard sees all the necessary marking. In addition, usually masters enough that they manually tighten the disk. But if the manufacturer indicates otherwise, it is better to listen to his advice.



Never forget about the main rules of working with a corner grinder. Special clothing, knowledge of the operating manual, compliance with all safety requirements can save lives. Moreover, if possible, Put off working on such a dangerous tool.If you feel unwell or tired.



Always be very careful when dealing with a Bulgarian. We wish you, master of all trades, only successful work. Let's get all the plans done. Share your personal rules for working with UCS in the comments. Your experience could be valuable for everyone.