Durable MDF boards: a worthy alternative to natural wood

Thirteen million three hundred fifty five thousand two hundred seventy two

Plate made of pressed wood chips, called MDF. Unlike particleboard or fiberboard, no toxic glue. A small wood fibers cling among themselves due to the natural viscous resin – lingin. This ingredient is a binder, but are fully eco-friendly component. On the strength of the finished composite is almost as good as real wood. At the same time:

• much easier;
• much cheaper;
• not afraid of contact with moisture.

Blanks provided on the website https://torgplit.com.ua/plitnye-materialy/mdf/ you can choose the thickness of 4-22 mm with different method of surface treatment. The front side can be laminated, polished or impregnated with a moistureproof composition.



Why choose MDF plate than the DSP materialresources billet for strength similar to natural wood. The material is able to withstand mechanical loads reinforced and not amenable to thermal impact. Moisture resistance is another advantage of MDF. They are not deformed from contact with moisture or the constant vapour. That is why are considered the best option for the manufacture of kitchen sets (frames and facades).

Another important point is the pressed plates do not infest wood pests. Eliminates the formation of mold, which is important for the health of the household and durability of products made of such material.

• Plates are machined at the same retain its structure (not stratified).
• The composite can lacquering, paint, paste over the polymer film. The latter will be able to imitate marble, granite or other natural stone — any type of decor options to suit your taste.
• Thanks veneering MDF Board stops look different from the expensive wood. But, it is far cheaper in cost, and this attracts buyers.

To choose a composite can with a decorative coating or without it. In the second case the material will be cheaper but will require additional treatment on their own.



The use of pressed panleukopenia from compressed wood shavings are the most popular raw materials for furniture industry. From eco-friendly and durable enough material to obtain a durable kitchen sets, walls, living rooms, wardrobes and beds. If you need an inexpensive but durable facade for furniture also choose MDF.

Countertops for dining, Desk and computer tables are made predominantly from MDF. Such caps:

• not shrink under his additional weight;
• eliminate the deformation;
• keep an aesthetic appearance.

Thin veneer MDF wall panels, used as additional insulation when constructing a roof. Also used when decorating the window sills or the flooring.