1223
Homemade cock punched shell house
What to do if your home is hit by a shell? To be honest, I would have lost his head. But the authors of this post have decided to repair it on their own. What eventually happened propose to look on.
Cooking metal (proftruba 20h20h2mm and 40h20h2mm):
twisted brush clean and treat the rust converter.
Brew basket (pictured standing upside down)
Degreased and gruntuem 2 layer soil GF.
forward 20 hours and ready to paint: we clean problem areas sandpaper and degreased.
Enamel paint PF-115 in 2 layers (color selected on the basis of \ "what was on hand \»).
Cook ground for counterweight (proftruba 40h20h2 and fittings 10mm)
Cook boom boom with fasteners (profiled tube 80h80h4, metal sheet 6mm)
Proftrubu welds with holes for mounting supports. Hole pitch 100mm.
With their help, you can adjust the tilt of the boom.
Boil need short welds (20-30mm) with breaks for cooling the metal.
Otherwise, the beam lead
Putting it all together to check
Gruntuem in 2 layers
Beautiful as basket.
So he tested time
As used chain hoist winch lifting capacity of 550 kg and a chain length of 6m.
Sling made of galvanized wire rope 6mm and secured in a homemade tee sheet metal 6mm
and wheel studs from brand car. To prevent injury, ropes wrapped reinforced
tape at fixing rigging
As a counterbalance to use bags with granite rubble of 25 and 50 kg.
All tested and works fine. Work much more convenient than PROMALP
Hole in the wall closed shield of OSB and began to foam sheathing
Managed to attach only 2 sheets, after which the work had to be suspended due to high winds and pounding Donetsk
in the meantime, the smoke from the rocket hit \ "point y \" almost cleared.
Cooking metal (proftruba 20h20h2mm and 40h20h2mm):
twisted brush clean and treat the rust converter.
Brew basket (pictured standing upside down)
Degreased and gruntuem 2 layer soil GF.
forward 20 hours and ready to paint: we clean problem areas sandpaper and degreased.
Enamel paint PF-115 in 2 layers (color selected on the basis of \ "what was on hand \»).
Cook ground for counterweight (proftruba 40h20h2 and fittings 10mm)
Cook boom boom with fasteners (profiled tube 80h80h4, metal sheet 6mm)
Proftrubu welds with holes for mounting supports. Hole pitch 100mm.
With their help, you can adjust the tilt of the boom.
Boil need short welds (20-30mm) with breaks for cooling the metal.
Otherwise, the beam lead
Putting it all together to check
Gruntuem in 2 layers
Beautiful as basket.
So he tested time
As used chain hoist winch lifting capacity of 550 kg and a chain length of 6m.
Sling made of galvanized wire rope 6mm and secured in a homemade tee sheet metal 6mm
and wheel studs from brand car. To prevent injury, ropes wrapped reinforced
tape at fixing rigging
As a counterbalance to use bags with granite rubble of 25 and 50 kg.
All tested and works fine. Work much more convenient than PROMALP
Hole in the wall closed shield of OSB and began to foam sheathing
Managed to attach only 2 sheets, after which the work had to be suspended due to high winds and pounding Donetsk
in the meantime, the smoke from the rocket hit \ "point y \" almost cleared.
