537
As I have ears repaired
Dear YaPovtsy, I want to share my rukozhopstvom.
I have a headphone, the name will not be called for in order not considered advertising.
They served me faithfully for 4 years.
It seems not bad ears, but eventually burst into the trash, Chinese leather on the headband and appearance left much to be desired. Throw a pity, as that has become attached to them.
It was decided their little otrukozhopit.
Will be 30 photos, please do not break.
The last straw was on the headband pad, it just fell off.
2. It was decided to replace the natural leather in the leather, which on occasion has got to some shop, and at the same time to clean earphones.
3. In general, took up the matter
4. Remove, or rather ear pads and otschelkivaem videm where tons of mud
5. Turn off the panel with DG
6. Remove the bowl previously sealed-off wire
7. All dismantled and ready for cleaning
8. Cut away with leatherette headband
9. Take appropriate size piece of skin that's such glue
10. Apply glue to the skin with a thin layer of
11. Also apply the adhesive on the inner surface of the arc. Since the adhesive contact, give him a little dry
12. Cushioning all this economy
13. It turned out like this. It seems not bad
14. Cut away excess
15. It was decided to make the strength of threads, so I will be calmer
16. Cut native pad
17. We need a foam and plastic base
18. Make a sandwich of the old foam plastic substrate and double-sided tape
19. On the tape pasted the skin as well as on the headband headphones. Bow inside coat with glue
20. Putting it all together
21. While the glue is drying, clean the ear cushions
22. submit them to dry
23. Net domestic
24. The result on the face
25. Putting it all in reverse order
26. payaem like this solder zero sense and warms the soul
27. Almost gathered
28. Put on the ear cups, all things are pure, happy eyes
29. Here is such a result was
30 I have everything!
Can anyone come in handy then.
Photos are clickable.
All good, kick
I have a headphone, the name will not be called for in order not considered advertising.
They served me faithfully for 4 years.
It seems not bad ears, but eventually burst into the trash, Chinese leather on the headband and appearance left much to be desired. Throw a pity, as that has become attached to them.
It was decided their little otrukozhopit.
Will be 30 photos, please do not break.
The last straw was on the headband pad, it just fell off.
2. It was decided to replace the natural leather in the leather, which on occasion has got to some shop, and at the same time to clean earphones.
3. In general, took up the matter
4. Remove, or rather ear pads and otschelkivaem videm where tons of mud
5. Turn off the panel with DG
6. Remove the bowl previously sealed-off wire
7. All dismantled and ready for cleaning
8. Cut away with leatherette headband
9. Take appropriate size piece of skin that's such glue
10. Apply glue to the skin with a thin layer of
11. Also apply the adhesive on the inner surface of the arc. Since the adhesive contact, give him a little dry
12. Cushioning all this economy
13. It turned out like this. It seems not bad
14. Cut away excess
15. It was decided to make the strength of threads, so I will be calmer
16. Cut native pad
17. We need a foam and plastic base
18. Make a sandwich of the old foam plastic substrate and double-sided tape
19. On the tape pasted the skin as well as on the headband headphones. Bow inside coat with glue
20. Putting it all together
21. While the glue is drying, clean the ear cushions
22. submit them to dry
23. Net domestic
24. The result on the face
25. Putting it all in reverse order
26. payaem like this solder zero sense and warms the soul
27. Almost gathered
28. Put on the ear cups, all things are pure, happy eyes
29. Here is such a result was
30 I have everything!
Can anyone come in handy then.
Photos are clickable.
All good, kick
