How to create a modern mirror

A great report on how to produce modern mirror. Be sure to look further gifok collection on this topic.

First, a massive glass is taken to the base.





Which is passed through the apparatus for cleaning.
It occurs with the aid of water and cerium oxide, after which the polishing brushes,
in order to remove contaminants from both sides.



Glass is then rinsed with demineralized hot water.



Sprayed tin where is the rear of the mirror.



The second layer of sprayed liquid silver and connects with tin.
This admixture of silver glass turns into a mirror.



Part of the spray rinsing, wash off the excess silver.
Wash off silver is filtered from the effluent, and then be used for other mirrors.



Then, for the protection of silver, spray a layer of copper.



And here you see the mirror moving in the dryer (picture above).
Drying takes place at 71 ° C, each mirror is enough a few seconds in order to get rid of moisture.



Last layer- paint. This time was dried at 99 ° C.



In general, the paint is applied twice, yes, I lied to you, but the second time drying is performed longer and at 118 ° C.



After acid washing in order to remove all traces of metal, mirror put horizontally.



Now the mirror inspection to make sure it is an integer, flat and free from damage.
That dude who rabotaetsya- easy to check the mirrors ... but it,
probably from his face already sick. ;)



Quality is confirmed and can be transported.



The robot gives the desired shape of the mirror.



Done!