541
Parse dishwasher
27 ph
I60 has highlighted an error in the PMM AEG Electrolux, in a book about her nothing, Google was not verbose, but suggested that this thermostat. Typewriter 2 years
the warranty is over, the master decided not to call and try to solve the poser. So again, in Google did not find anything intelligible for
rukovodsvu disassembly assembly, he took a screwdriver, beer and started.
1.Sobstvenno here, built Appl.
2. What used to pull her out of the closet unscrew the screws
3. Bottom view
4. We nominate
5. Remove the 4 screws facade
6. The view of the facade without
7. Corners simply take out
8. Finish
9. Remove the side panels (upper screw)
10 and lower
11. And another front
12. Remove the wall
13. and on the other hand
14. The side view
15. remove the sensors
16. The view from the other side, a container with salt, filter and inlet hose
17. Hose by snap
18. take out pre disconnecting wires from the valve.
19. otruchivaem nut from the regulator rigidity
20. remove the regulator, there it is drained into the water bucket.
21. Turn off the nut from the tanks for salt container itself will not shoot, so for clarity.
22. Like all clean, no pollution, then it makes no sense to disassemble.
23. Sima front plug (at the door)
24. It is just what we need, thermostat.
25. disable terminals that would clean
26. Here it is reptile
27. Putting it in reverse order.
Yes, it is possible bezsmyslenno demolition, but once it happened, behold, share experiences, mzhet be someone really useful.
Everything.
Source:
I60 has highlighted an error in the PMM AEG Electrolux, in a book about her nothing, Google was not verbose, but suggested that this thermostat. Typewriter 2 years
the warranty is over, the master decided not to call and try to solve the poser. So again, in Google did not find anything intelligible for
rukovodsvu disassembly assembly, he took a screwdriver, beer and started.
1.Sobstvenno here, built Appl.
2. What used to pull her out of the closet unscrew the screws
3. Bottom view
4. We nominate
5. Remove the 4 screws facade
6. The view of the facade without
7. Corners simply take out
8. Finish
9. Remove the side panels (upper screw)
10 and lower
11. And another front
12. Remove the wall
13. and on the other hand
14. The side view
15. remove the sensors
16. The view from the other side, a container with salt, filter and inlet hose
17. Hose by snap
18. take out pre disconnecting wires from the valve.
19. otruchivaem nut from the regulator rigidity
20. remove the regulator, there it is drained into the water bucket.
21. Turn off the nut from the tanks for salt container itself will not shoot, so for clarity.
22. Like all clean, no pollution, then it makes no sense to disassemble.
23. Sima front plug (at the door)
24. It is just what we need, thermostat.
25. disable terminals that would clean
26. Here it is reptile
27. Putting it in reverse order.
Yes, it is possible bezsmyslenno demolition, but once it happened, behold, share experiences, mzhet be someone really useful.
Everything.
Source:
