590
Driving on the track on the roof
It all started in the ditty:
Oh, snow, snow-white blizzard ...
"Making ears" among each route can not wait ...
It's how ... Different body damage "popular" in the different seasons.
Summer and generally warm season characterized by minor accidents, such as the flying bumper dents and scratches on elements such as green fences from scratches and bumps in the yard of the door dumpster.
In winter, this "small retail" becomes much less.
Probably not visible under a layer of small reagent tsarapok ...
With the advent of ice - behold for all types of strokes in the ass, complex front damage and of course - the beginning of winter hits - HRE TAGAZ!
It will be about 100 photos
This was the first fotochki in the mail for understanding - does it make sense to recover and how much it might cost:
In snowboarding it is called "Remove the track»
Peering closer - we evaluated and come to an understanding with the client that still advisable to repair, if we can find a not very expensive parts
When turned, and put "extremals" his feet - like snout and nothing
Tailgate twisted
The door sticks
Roof some fancy shapes
It may even touch on hummocks driver bowler
Cleared of snow and mud - saw a bizarre wave, but at the same time - Fiction: ventilator-intact tselehonkim
And so, in general, complete despondency ...
and devastation ...
The canvas roof ordered for delivery, it quickly found
True, scary stripped storage time and with a touch of rust ...
Well, are we then blast the ...
But this Circuits troubles arose - apparently, it was not the TAGAZ champions overturn (spare time we were looking for a whole month)
On disassembly this detail - a rarity, and a new wait longer 2-3 times would have about the same amount would have risen more since sold only whole new body side
But there were also quartered, that she was in our yard
Starting off with the salon
Bubble stretched ceiling, but the interior as a whole is not particularly hurt
Top view eloquent
Face a bit twisted, and like photo - not terribly
But look how twisted, for example, hood hinges, and they are not made of foil ...
Bordachok not only closes the first attempt, and scattered throughout the cabin such interesting accessories like a fire extinguisher (it is good that it is not reached during the somersaults to someone's head)
Remove all prevent us from skin
Removal of beauty, sheltering Carpet film
Fix the body on Stacking clips and dump the suspension
Front amplifier roof pull up hydraulic stretching
Drilled at points scary crumpled cloth roof and coming to our eyes at least battered amplifiers
Side view of the "cut down" the roof
But before you "paste" a new roof - we need more to understand here this
Since left roof pillars - the whole fabric will not rise exactly in place
Gone missing hook for point lights on the rear fender and pull it firmly into place
The purpose - not even naruzhny metal wings and pull back with a blow gone amplifiers
Now we go inside and begin otsverlivat on points, disassemble like Lego - power rear left wing
One puzzle, the second puzzle ...
And now have access to the jammed inside
Now we go to the street to our donor parts
And we get out of it that's a useful piece of metal
naruzhnego
As seen above - a piece of the donor is not enough to remove all the jammed
Therefore, the upper part of the wing, we need to equate in any of these knobs here :)
Welded and pull!
Gradually something turns shaped like a wing
And highlights are not as scary in the metal wing
Pounces on top of the canvas roof Bushnov (the owner himself is found in the dismantling and paid delivery - for us it was taken)
Do not worry, this is only the surface corrosion, as such, unfortunately, most of the details of goods - make sandblasting below to welding
The whole web is not ideally placed on seats
Undertake the Rack amplifiers and continue to deal with them, because that canvas roof precisely laid down - must be exactly the whole body, all amplifiers
Cut down the outer crumpled metal and our eyes are opened Gone internal amplifiers
Crumpled piece swing out - but some jams on the neck of the fuel tank ...
Such peening if - it's just very hard work, and / or mountain fillings ...
To pull down power rear wheel arch - cling directly behind the hole for the gas tank ...
Top pull arch enhancers return to the place rihtuem - obtained is similar to the original
Throws a donor metal, dub it anywhere and we catch
Scald it in places cut a continuous weld with amplifiers
In the field of spot welding - points
We clean carefully all got seams
In parallel, the global work on the geometry of the body and replacing major body elements - was the work of straightening all the minor body damage
Here - hanged mass for spotter on bare metal
We clean place to pull the Spotter damage to the bare metal
Take up spotter - and by welding small point - pull on his back the hammer
The dents on the metal disappearing as if by magic
It has been almost exactly the door and wing
All this shows is now up to the state perfectly smooth thin layer of putty
Came the windshield - it is necessary to finish the roof, blasted her first
Refreshed roof and are putting everything seems normal rises
Scald canvas roof on points
By the way - we have coincided - made in parallel with this rusty roof sandblasting rear wing on the Land Rover, it turned out that's this:
That is:
Well, then - output rear left fender, seat of our complex straightening turns is such rovnenko primed form
And part of the wing of the door aperture
Primed entire board
Ready for painting, and the right wing with a roof
Handles all internal seams sealant otkrasim vnutryanku
It remains the case for small - has already been set body
...
...
Hind wings-board - as the new
...
Laundered changeling
...
And make the ears of recently - vyezzhat fresh air
...
...
...
...
...
Posted in [mergetime] 1387148493 [/ mergetime]
I have everything
Thank you for attention!!!
Source:
Oh, snow, snow-white blizzard ...
"Making ears" among each route can not wait ...
It's how ... Different body damage "popular" in the different seasons.
Summer and generally warm season characterized by minor accidents, such as the flying bumper dents and scratches on elements such as green fences from scratches and bumps in the yard of the door dumpster.
In winter, this "small retail" becomes much less.
Probably not visible under a layer of small reagent tsarapok ...
With the advent of ice - behold for all types of strokes in the ass, complex front damage and of course - the beginning of winter hits - HRE TAGAZ!
It will be about 100 photos
This was the first fotochki in the mail for understanding - does it make sense to recover and how much it might cost:
In snowboarding it is called "Remove the track»
Peering closer - we evaluated and come to an understanding with the client that still advisable to repair, if we can find a not very expensive parts
When turned, and put "extremals" his feet - like snout and nothing
Tailgate twisted
The door sticks
Roof some fancy shapes
It may even touch on hummocks driver bowler
Cleared of snow and mud - saw a bizarre wave, but at the same time - Fiction: ventilator-intact tselehonkim
And so, in general, complete despondency ...
and devastation ...
The canvas roof ordered for delivery, it quickly found
True, scary stripped storage time and with a touch of rust ...
Well, are we then blast the ...
But this Circuits troubles arose - apparently, it was not the TAGAZ champions overturn (spare time we were looking for a whole month)
On disassembly this detail - a rarity, and a new wait longer 2-3 times would have about the same amount would have risen more since sold only whole new body side
But there were also quartered, that she was in our yard
Starting off with the salon
Bubble stretched ceiling, but the interior as a whole is not particularly hurt
Top view eloquent
Face a bit twisted, and like photo - not terribly
But look how twisted, for example, hood hinges, and they are not made of foil ...
Bordachok not only closes the first attempt, and scattered throughout the cabin such interesting accessories like a fire extinguisher (it is good that it is not reached during the somersaults to someone's head)
Remove all prevent us from skin
Removal of beauty, sheltering Carpet film
Fix the body on Stacking clips and dump the suspension
Front amplifier roof pull up hydraulic stretching
Drilled at points scary crumpled cloth roof and coming to our eyes at least battered amplifiers
Side view of the "cut down" the roof
But before you "paste" a new roof - we need more to understand here this
Since left roof pillars - the whole fabric will not rise exactly in place
Gone missing hook for point lights on the rear fender and pull it firmly into place
The purpose - not even naruzhny metal wings and pull back with a blow gone amplifiers
Now we go inside and begin otsverlivat on points, disassemble like Lego - power rear left wing
One puzzle, the second puzzle ...
And now have access to the jammed inside
Now we go to the street to our donor parts
And we get out of it that's a useful piece of metal
naruzhnego
As seen above - a piece of the donor is not enough to remove all the jammed
Therefore, the upper part of the wing, we need to equate in any of these knobs here :)
Welded and pull!
Gradually something turns shaped like a wing
And highlights are not as scary in the metal wing
Pounces on top of the canvas roof Bushnov (the owner himself is found in the dismantling and paid delivery - for us it was taken)
Do not worry, this is only the surface corrosion, as such, unfortunately, most of the details of goods - make sandblasting below to welding
The whole web is not ideally placed on seats
Undertake the Rack amplifiers and continue to deal with them, because that canvas roof precisely laid down - must be exactly the whole body, all amplifiers
Cut down the outer crumpled metal and our eyes are opened Gone internal amplifiers
Crumpled piece swing out - but some jams on the neck of the fuel tank ...
Such peening if - it's just very hard work, and / or mountain fillings ...
To pull down power rear wheel arch - cling directly behind the hole for the gas tank ...
Top pull arch enhancers return to the place rihtuem - obtained is similar to the original
Throws a donor metal, dub it anywhere and we catch
Scald it in places cut a continuous weld with amplifiers
In the field of spot welding - points
We clean carefully all got seams
In parallel, the global work on the geometry of the body and replacing major body elements - was the work of straightening all the minor body damage
Here - hanged mass for spotter on bare metal
We clean place to pull the Spotter damage to the bare metal
Take up spotter - and by welding small point - pull on his back the hammer
The dents on the metal disappearing as if by magic
It has been almost exactly the door and wing
All this shows is now up to the state perfectly smooth thin layer of putty
Came the windshield - it is necessary to finish the roof, blasted her first
Refreshed roof and are putting everything seems normal rises
Scald canvas roof on points
By the way - we have coincided - made in parallel with this rusty roof sandblasting rear wing on the Land Rover, it turned out that's this:
That is:
Well, then - output rear left fender, seat of our complex straightening turns is such rovnenko primed form
And part of the wing of the door aperture
Primed entire board
Ready for painting, and the right wing with a roof
Handles all internal seams sealant otkrasim vnutryanku
It remains the case for small - has already been set body
...
...
Hind wings-board - as the new
...
Laundered changeling
...
And make the ears of recently - vyezzhat fresh air
...
...
...
...
...
Posted in [mergetime] 1387148493 [/ mergetime]
I have everything
Thank you for attention!!!
Source: