887
Home speakers of the car stereo
Please do not kick my first post.
Will be 16 photos
From a friend got me a tape recorder Sony and two speakers of the same firm. For a long time the case is in the country lay hands did not reach. He graduated from the repair in the new house and decided to make the speaker system. Of course car speaker Hi-Fi system will not get, but fuller sound worthy to testify can be achieved. I started with the amplifier, ie the radio. To power the radio requires 12v DC (constant voltage) and 150-400 watts, depending on the radio and the number and type of speakers connected to it. I used a regular power supply of 350 watts (in connection with the profession to get is not a problem). Sawn plywood and assembled here this box.
Photo 1
Rear panel BP specifically bred for better cooling
Photo 2
Sealed screws
Photo 3
Photo 4
Next soldered connections and pasted CARPET.
Outputs decided to make tapa "clothespin", four pairs of speakers on and a couple of the subwoofer.
Photo 5
Photo 6
A further column. Sliced veneer
Photo 7
COMBINE body. Soldered wires for pegs.
Photo 8
Insulation (clear plastic tube) in principle does not need, it's my oddity of the profession.
Photo 9
Photo 10
He collected and checked.
Photo 11
Working. I dismantled and covered with varnish.
Photo 12
Photo 13
Final assembly and testing.
Photo 14
And installation on a prepared place
Photo 15
Sounds good in full, but the harsh bass due to the fact that the dynamics of the car, but it is treated equalizer
That's all I wanted to say. Thank you for your attention.
Photo 16
Source:
Will be 16 photos
From a friend got me a tape recorder Sony and two speakers of the same firm. For a long time the case is in the country lay hands did not reach. He graduated from the repair in the new house and decided to make the speaker system. Of course car speaker Hi-Fi system will not get, but fuller sound worthy to testify can be achieved. I started with the amplifier, ie the radio. To power the radio requires 12v DC (constant voltage) and 150-400 watts, depending on the radio and the number and type of speakers connected to it. I used a regular power supply of 350 watts (in connection with the profession to get is not a problem). Sawn plywood and assembled here this box.
Photo 1
Rear panel BP specifically bred for better cooling
Photo 2
Sealed screws
Photo 3
Photo 4
Next soldered connections and pasted CARPET.
Outputs decided to make tapa "clothespin", four pairs of speakers on and a couple of the subwoofer.
Photo 5
Photo 6
A further column. Sliced veneer
Photo 7
COMBINE body. Soldered wires for pegs.
Photo 8
Insulation (clear plastic tube) in principle does not need, it's my oddity of the profession.
Photo 9
Photo 10
He collected and checked.
Photo 11
Working. I dismantled and covered with varnish.
Photo 12
Photo 13
Final assembly and testing.
Photo 14
And installation on a prepared place
Photo 15
Sounds good in full, but the harsh bass due to the fact that the dynamics of the car, but it is treated equalizer
That's all I wanted to say. Thank you for your attention.
Photo 16
Source:
