268
Armrest. Lada Classic.
1) I decided to make the armrest on the door card.
The main tasks: a) it must be easy to use, and c) do not interfere with driving, c) to look aesthetically pleasing.
Of paramount importance, and - this feeling, but it is our own feelings. Finally, practice. Of course, everything is being tested on the machines.
The design of the door did not intervene. Armrest creates a very comfortable and allows you to not get tired, even during long journeys. And of course like to get aesthetic pleasure from the work performed. No drawings, all sizes taken directly from the machine. Materials: 10 mm plywood I use "water-resistant" leather / deputy, velvet, foam, polystyrene, screws, glue 88. The parts are cut from plywood, for this I used an electric jigsaw.
It will be 18 photos.
2) Putting the frame.
3) Set the ribs rigidity.
4) fasten the support platform, it also serves as an amplifier frame.
5) In order to foam is not falling down, the foam fills the void.
6) In fact the whole arm.
7) can be worn. Again, to understand.
8) Color choose at will, who, some more like it. Sticking.
9) Putting frame and anchoring velvet.
10) on the frame sticking foam. He will give a final shape and volume of the arm, as well as make it more comfortable. Gently with foam, glue it dissolves.
11) overtighten materials, fasten pillow, cut mounting holes.
12) The armrest is ready to install on the door.
13) That's actually the place where he will stand.
14) impose the door handle on the arm.
15) Skip the fixing screws.
16) is set to the proper location.
17) That's actually all.
18) Thank you for your attention. )))
Source:
The main tasks: a) it must be easy to use, and c) do not interfere with driving, c) to look aesthetically pleasing.
Of paramount importance, and - this feeling, but it is our own feelings. Finally, practice. Of course, everything is being tested on the machines.
The design of the door did not intervene. Armrest creates a very comfortable and allows you to not get tired, even during long journeys. And of course like to get aesthetic pleasure from the work performed. No drawings, all sizes taken directly from the machine. Materials: 10 mm plywood I use "water-resistant" leather / deputy, velvet, foam, polystyrene, screws, glue 88. The parts are cut from plywood, for this I used an electric jigsaw.
It will be 18 photos.
2) Putting the frame.
3) Set the ribs rigidity.
4) fasten the support platform, it also serves as an amplifier frame.
5) In order to foam is not falling down, the foam fills the void.
6) In fact the whole arm.
7) can be worn. Again, to understand.
8) Color choose at will, who, some more like it. Sticking.
9) Putting frame and anchoring velvet.
10) on the frame sticking foam. He will give a final shape and volume of the arm, as well as make it more comfortable. Gently with foam, glue it dissolves.
11) overtighten materials, fasten pillow, cut mounting holes.
12) The armrest is ready to install on the door.
13) That's actually the place where he will stand.
14) impose the door handle on the arm.
15) Skip the fixing screws.
16) is set to the proper location.
17) That's actually all.
18) Thank you for your attention. )))
Source:
