18
What to do if the air conditioner is not affordable
The hot days are getting closer. In this weather, the fan is irreplaceable. Home air conditioning - even better, but what to do when even reluctant to move, and breathing the air that passes through the air conditioner, unpleasant?
In this case, cleverness and simple materials will come to the rescue. A little knowledge of physics also does not hurt, but this problem is edited "Site" I've already decided for you.
Now you will learn how to cool the air in the room with minimal time and money. Oh, that fan breeze!
How to make a fan You will need a fan
Progress of work
If you think it’s better to see once than read ten times, keep a detailed video with full instructions. Only this clip is in English. But it's clear without words!
about:blank
As you can see, the device works flawlessly. Of course, in order to lower temperatureIt will take more time, but the benefits of such an invention are undeniable! Be sure to share with your friends such a useful life hack and get to work immediately.
In this case, cleverness and simple materials will come to the rescue. A little knowledge of physics also does not hurt, but this problem is edited "Site" I've already decided for you.
Now you will learn how to cool the air in the room with minimal time and money. Oh, that fan breeze!
How to make a fan You will need a fan
- 6 plastic bottles
- plastic sheet
- stationery
- cable-string
- silicone
- 1 fan
Progress of work
- Take the bottles.
- Cut the top off the label line.
- Remove the lid.
- You should make six halves like that.
- Take a sheet of cardboard or plastic. Make a circle on it. The circle should be the same diameter as the blades of your fan.
- Carefully cut the circle on the drawn line. Watch your fingers!
- Draw six smaller mugs on the resulting basis - bottles will be attached here. Make sure they are symmetrically positioned.
- Cut out each of the circles.
- That's what you gotta do.
- Insert the cut part of the bottle into each circle and fix them from the inside with tape so that they do not move when glued.
- Secure the bottles with heat glue. You can use a glue gun, or you can use a stick of glue heated above a candle or lighter. It is not very safe, but you do not have to buy a glue gun.
- Make two holes like this between each pair of bottles and put cable ties through them.
- Apply the finished base to the fan.
- With screeds, attach the base to the fan net.
- Cut off the extra tails.
- That's what happens in the end.
- The principle of operation home-made fan next.
- Initial room temperature.
- 10 seconds after the fan started.
If you think it’s better to see once than read ten times, keep a detailed video with full instructions. Only this clip is in English. But it's clear without words!
about:blank
As you can see, the device works flawlessly. Of course, in order to lower temperatureIt will take more time, but the benefits of such an invention are undeniable! Be sure to share with your friends such a useful life hack and get to work immediately.
