How to make installation for the production of thermal energy

Thermal installation Frenette their hands

Quite an interesting design that allows you to provide heating of various premises — heat installation Frenette (with their hands to create such a unit is quite simple, it any folk craftsman) that does not require any fuel.

It is worth to mention that, despite the similarity of names, this setting has nothing to do with geothermal heat pumps, these designs operate on a completely different principle.





Diagram heat pump Frenette

The basic principle of operation Frenette

From school physics course known that the friction force between different substances can cause them to heat up to a sufficiently high temperature. It is this feature and was based on the inventor Eugene Frenette the basis of the created thermal device.

Applied heat pumps Frenette has undergone many changes, the design of the device was greatly modified and improved, but the basic principle of operation remains the same.

A pump of this type represents two vessels, placed one within another, the space between them is filled with technical oil. The inner cylinder is connected to a motor shaft rotating at high speed. Due to this, under the influence of friction forces between the surfaces of the cylinders and the coolant (oil) is heated to sufficiently high temperatures.

The resulting thermal energy is transferred to a traditional radiator heating (oil supplied to him piping systems) or used to heat air, which with the help of built-in the impeller are formed of heat flows.

According to the manufacturers, the principle of heat pump Frenette allows to obtain a device, the efficiency of which reaches 1000%, of course it's hard to believe (based on the usual school knowledge of physics).





The first is to note the fact that the coolant should be applied to oil, which has a large (compared to water) boiling point. Of course, there are water pump modifications, but they are more complex in design. This is due to the fact that the resulting friction energy is enough for transition of water in a vapor state, resulting in excess pressure in the system, which leads to the need of improving the reliability of all the construction sites.





In practice the factory settings and improvised pumps Frenette, the most common are the following modifications:

• The pumps are horizontal arrangement of the working cylinders (drums) have small overall dimensions. There are models in which the role of the inner cylinder plays the motor shaft, which can significantly simplify the design. But it is necessary to pay special attention to seal all the nodes with glands, rubber cuffs, and other such elements, the flow of the coolant is not allowed. This pump Frenette provides heating oil and supply it to the traditional radiator.
• The device is able to operate with increased efficiency, is a structure of two working drums and the impeller. The centrifugal force produced by the unwinding of the liquid by the impeller leads to the release of oil into the minimum clearance between the surfaces of the cylinders. The amount allocated under the forces of friction heat energy increases significantly. This design also connects to household radiators.
• Industrial plant, working on the principle of pump Frenette, in which the coolant is water, can operate without external supply device. Remember that to create such an installation at home is almost impossible, it is of interest only in an industrial scale.

 

Heat pump model Frenett

The inner cylinder is a mushroom design. When you pump the coolant (water) is heated to boiling and turns to steam, arising reactive power to ensure its movement through internal channels installation with high speed (reaching 135 meters per minute). This ensures high efficiency of the plant.

All factory modifications have a relatively high cost, therefore, of special interest are designs that you can build your own at home.

 

Homemade pump Frenette

Mount the pump Frenette with their hands is quite simple, you do not require costly parts and components. Installation does not require the use of additional impellers, and the functions of the inner cylinder performs several conventional steel discs placed on the driveshaft.

So, the main elements of a homemade heating system operating on the principle of a heat pump Frenette:

• Steel outer cylinder of suitable diameter.
• Metal disks, the size of which is slightly less than the inner diameter of the cylinder. Remember that the efficiency of the device will increase with the decrease of the gap between the structural elements.
• A small electric motor with extended shaft, on which are mounted internal drives.
• Mineral or other technical oil (e.g. canola or cotton).
• The system of pipelines providing circulation and household radiator.
• The motor shaft or the working axis, connected with it, is installed inside the outer cylinder on the bearings. We should not forget about the trusted seal data nodes. On the axis with a certain gap is mounted the required number of work disk. To ensure that the distance between them using the nuts, which are wound after each drive. The height of the nut is usually not more than 5-6 mm, the number of disks is chosen based on the height of the cylinder, the internal volume should be filled with them.

In the unit casing (outer cylinder) make two holes (top and bottom). Through the top of the heated oil is fed into the heating system and for returning it to the system, use the lower hole.

After Assembly of the basic units of the pump to fill it with oil, to connect the axle and the electric drive, inlet and outlet to the main heating. After sealing design you can run a homemade pump Frenette to work.

To simplify device management, to make its operation more convenient and efficient, it is recommended to collect the automatic control system, which is able to ensure the installation by lowering the room temperature to a certain critical value.

 

The scope of thermal installations

In principle, devices of this type can be used for heating a diverse range of environments, from garages, utility buildings, residential and industrial buildings, there are no restrictions in this matter does not exist.

If you use the pump Frenette for heating individual rooms or areas, it is advisable to connect it to a conventional heating radiators. In applying this device to provide heating in a residential building, it is necessary to consider the possibility of joint operation with the systems of water floor heating. This design provides the most efficient heating. In this case, the sensor providing automatic operation, is mounted in the pump housing, not the tie (like traditional radiant heating systems).

Despite the fact that the effectiveness of this simple device it is hard to believe, practice shows its reliability and high performance. So if you are thinking about providing nonvolatile heating, be sure to consider installing pumps Frenette. published

 

P. S. And remember, just changing your mind - together we change the world! ©

Source: ecology.md/page/kak-izgotovit-teplovoj-nasos-frenetta-svoimi-rukami