Just a few days ago, the new iPhone was introduced corporation Apple, and the team has already iFixit disassembled an older model, iPhone 6 Plus, by screws, in a literal sense.
Looking ahead, it is worth saying that the iPhone 6 Plus scale maintainability got 7, which is a significant improvement over the iPhone 5S. What, continued - more than a dozen photos and a description of each stage of disassembly.
Step 1
Processor: 64-bit processor A8; RAM: 1 GB Memory: 16, 64 and 128 GB; Display 5, 5 inch, 1920x1080 pixels (401 ppi) Retina HD; Camera: iSight to 8MP; Sensors and transducers: fingerprints, barometer, gyroscope, accelerometer, light sensor ; Size: 158, 1 mm in length, 77, 8 mm wide and 7 mm thickness of the device 1.
Camera slightly protrudes from the housing.
In fact, the body has a plastic insert to the antenna device can receive the signal.
Step 2
Wringing pentalobe-cogs
Branch of the display using the cunning tool iSclack
The inner housing
Cables running from the screen securely fastened with metal holders
Step 3
Step 4
Step 5
The camera is part of the module, with the inclusion of an external speaker.
Step 6. Branch metal plate
Apple Inc. has changed the same way to connect the Home button to the motherboard. This, according to the team razobrschikov, improves maintainability device.
Step 7
In older models high capacity battery than the iPhone 6: 6, 91Vt • h 1810mAch. As a result, battery life iPhone PLus more than the iPhone 6.
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
Step 16
Step 17
According to the team iFixit, Apple's new smartphone is pretty easy to repair, plus it is better protected from external influences. Ideally, the display is separated in the first place, because the problems with the display - the most common.
Source: habrahabr.ru/post/237371/