1133
Arc reactor with their own hands
Materials:
- Plastic model (white and transparent) Tamiya thickness of 0.3, 0.5, 1, 1.5, 1.7, 2, 3 mm;
- Plastic square bars 5x5 mm;
- Copper foil;
- Copper wire;
- LEDs;
- Adhesive (model of Thermo and cyanoacrylate);
- Plastic cold polymerization;
- Model paint;
- A piece of old board and a handful of electronic components to taste =).
All plastic parts are cut from plastic model with a laser engraving machine model glue and glued. Pink piece molded plastic cold polymerization.
Pre-assembly.
Here is glued only 81 item =).
Transparent ring handled fine sandpaper to give a haze, glued together. Drill the holes and put the LED.
The main element of the reactor is ready!
Few electronic waste stuck to a piece of card with hot melt.
Plastic parts are painted model paints with an airbrush.
Thus, the source of infinite energy is created, it's time to take a stand.
The base of the stand - from a piece of MDF, the slots under the battery and wires - a router.
Ring with legs - plastic model again.
Everything is ready! You can kick.
--img26--
