Photocopying in the USSR: Shake off the dust of decades

Continuing nostalgic article Amateur photographers come from the Soviet Union found the recent experience of "old" (but what - how did the past millennium!) A man with the nickname B1a3e

34 photos plus the author's text
___
The vast majority of people do not really represent how the process of working with photos simply by virtue of the fact that whether or not addicted to it or not caught the era of black and white films. I decided to correct this omission and write a small review. Fortunately almost all the equipment remained on the mezzanine in a relatively good condition.

So: the film is filmed, taken when dry. We get enlarger.





probably the first time in 10 years, open lid of the suitcase.



MDA. Foam in the meantime disintegrated to the state of the sticky lewdness.



Come on, scraped off, and it starts to get components.



So, like everything got. Forgot should now how it's going to



What a handsome man



The lamp lay the same 10 years. Inside the campaign pieces of glass, clearly hear how they're hanging out. The very light matte, spiral state is not visible. Okay, we cleave to good luck. Include:



Ofiget. Lights. True as it is dull. Okay. For authenticity puts a photo.



Not a light bulb shines nifiga. Enlarger to join civilization.



It looks cool. Let's see how it will work.



It is sad. It get even dimmer. It seems misses the focal length of the lens. Experiment for the sake of trying to shine a flashlight with a twisted prism.



The result exceeds all expectations, but keep a flashlight so is not an option.



It's time to fill the tape. Choosing the right crop or resize (yes, framing was not done with Photoshop and select the desired crop box, which limited the area of ​​exposure). At the same time put a piece of glass mat in a special pocket on the film.



Well, like nothing more interesting. Since the seal decomposed try to replace it with glamorous pink napkins.



I climbed clean enlarger and came across this.



Gosspadi, what is he old. Anyway. Scrub away most vicious dirt dismantle it.



Energy-saving technologies, our all. The lamp stood as a native, got a nice even light than an incandescent lamp.



Lantern way tri-mode. Time:



Two:



And three:



Well, if there are lights why not go all the Photo print process from scratch? Photographic paper, almost new



Workplace young photographer. In the bathroom, of course.



Trough with the developer, fixer lock.



Photo paper and film can be run only by the light of a red lantern.



Refill film, put a piece of glass in front of red Lenses enlarger, include it, select the position of pre-seasoned paper



The most crucial moment. Remove the red piece of glass, count to ten. One, two ...



... Ten. The lens, gently take a piece of paper and the developer.



The picture appeared on the paper, wait until it becomes sufficiently clear. The main thing is not to overdo, and then deteriorate and it will be too dark. All further into the lock.



Wait till some time, washed in a basin of clean water and hang to flow around.



While the liquid flows from the pictures we obtain glyantsevatel. This heater with mirrored surfaces, which makes our glossy photos.



Screwed legs, handles, remove the mirror.



We put a photo picture to the mirror. Packer roller that there would be no air bubbles.



We put a mirror in place, close the cloth and is fastened on top of the special lock. We turn on the device and go to drink coffee.



After waiting a sufficient photo dry. Turn off glyantsevatel, remove the cloth and mirror. Photo of herself jumping into our hands. Smell svezheprosushennoy pictures remembered for a lifetime

That's all. Further pictures fit in the photo and proudly show your friends



Source: ">