"Scrollsaw" amplifier from an old muz.tsentr. :)

It took me to the speakers' panel control »...
Initially I wanted to buy, and then caught sight of the old music. Center «AIWA».
Centre worker, only the CD is not read ...
There AUX in, so that my goals go, it's just a huge,
and on the table, and so little space that-be still and a fool to put it ...

I decided to "operate" it and remove all unnecessary ...

Will be 10 photos.





Parse housing within 2 board and transformer ...
So, as it was planned to make the size of a compact discovered pechalka,
board docked to each other on the connector :(



disconnect the wiring to the cassette deck and sidyushniku:

Threat-That this connector (black).



Remove the card, something would have to make a compact soldering ...
I found an old trail, at the most suitable time.
The board 30 contacts.

PS-Zvinyayus process is not entirely Fota fascinated forget :)



Payaem ...



Now the same thing to the second solder:

Everything is fine ... I Soldering Iron Tip large ... zaipalsya shorter ... :(



Crosshair included check the patient survived the operation ...

All works:



With 8-ki plywood gashes new building ... fitting:



From the center has only half of the muzzle-face ...
all unnecessary (cassette DEKA and sit sawed off)

face paint in black, previously having stuck masking tape window and buttons.

Lubricate photo :(
And to be honest shitty paint I got ... decided plya, be thrifty and bought a bottle of black ink for 70 rubles ...



I forgot sfotkat layout boards inside ... :(
Well ... on the walls of the center zapilivaem size top cover:



The result:



The center has become a half times less :)
It operates radio, and AUX, the rest is not necessary.
Speakers also likely to change, so how miserable gray plastic spite:

All.



Source: ">