How to build megaliths (6 photos) Bashny.Net

Looking for dents, who left in the megalith some blocks on the surface of the other blocks, it becomes clear that the lower blocks were soft. They softened due to heating to a temperature of about 1000 degrees Celsius. This technology allows sintering stone blocks and make a stronger wall. Naturally, we are now even with a strong desire can hardly repeat it.





In this photo you can see the formation of internal triangular corners, eliminating the radial cutting technology tools. This is possible only if the softening of rock due to high temperature.



Almost straight line and almost flat surfaces indicate sharing technology and cutting beam sintering at high temperature.



Prints on this solid rock indicate that it has been heated to the softened state. Similar prints remain on the hot asphalt.



Tapered projections indicate indentation softened holes in stone blocks pressed against this surface.



When heated to 1000 degree plane deformed. On the basis of the images can be concluded that some megalits were constructed using the combined heating and cutting techniques to a plastic state. Volcanic rocks when heated to a plastic state do not lose their strength properties. On the contrary, prosihodit stress relief, elimination of cracks and rejuvenation of the stone.