34
Ways to improve the quality of heating systems, so that the radiator warms like crazy
With the arrival of cold weather, the question of insulation of the house becomes urgent. Operation of the heating system It plays the most important role in this process. Of course, you need to glue the windows and close all the cracks in the house so that it does not blow out. Without proper heating, there is nowhere.
In this article, the editorial board will tell you how to improve the operation of heating systems. We will talk about how to make the radiators in the house warm as much as possible. If you use them for heating in the house, then do it with maximum efficiency.
There are several simple, but very effective ways that significantly increase the heat transfer of radiators. In addition, they are not very expensive, which is a great plus for everyone.
The main problem of low heat transfer is dense curtains that hide “ugly” batteries. Because of this, the air circulation (convection) is disturbed. The airflow is not released enough into the room. It turns out that the radiator warms itself more than the surrounding space.
Also, a large role is played by the great depth of the window sill or niche in which they try to hide the radiator. Everyone here already chooses for themselves. Either hide the “scary” radiator from the eyes, or heat your apartment. We advise you to find some balance, try lighter curtains or make a visual window so that the air freely leaves the radiator.
Instructions for radiators and other heating appliances always indicate the necessary indentations. Do not ignore these instructions, they play an important role in the installation. In addition, the most important parameter is the depth of installation of the battery. This is why the radiator uses its capabilities to the maximum.
The gap from the wall to the rear wall of the radiator shall not be less than 50 mm. The same applies to the distance from the floor - 5 cm at least. Of course, you need to look into the instructions and carefully monitor the distances during installation. In the case when the window sill stands behind the battery, for each centimeter of the projection, the distance to the window sill should be increased by 2.5 cm. In this case, the window sill will not interfere with the proper circulation of warm air.
Reflective screens For insulation of the house, foil screens can also be used. They perfectly improve the efficiency of the heating system. This design is similar to the barrier between the radiator and the wall, which in this case does not take the useful heat on itself. In addition, the use of such a screen increases the temperature regime by 2-3 degrees of heat. And the energy spent on heating is reduced by an average of about 5%.
This method is most often used in practice. Nearly one in three people I know have such foil screens for a radiator. No one has ever regretted this useful acquisition.
Known fact: the efficiency of the dust radiator is reduced by 7-10%. Clusters of dirt and dust have a very negative effect on heat transfer. No matter how banal it may sound, you just need to thoroughly clean the radiator from dust, and then it will be better to heat. In addition, if you monitor the cleanliness of the device, it will last longer.
The bandage can be diagonal, lateral or lower. Maximum heat transfer is provided only by the diagonal garter option. In this case, air passes freely through all sections of the radiator. Also, this method involves the complete absence of areas in which pollution accumulates. Today, the diagonal winding is the most effective way to tie the radiator.
These methods significantly increase heat transfer. In this case, the heating system improves by tens of percent. We also advise to use tips in the complex, for maximum efficiency. By the way, if after this prevention, the radiators still do not heat well, it is worth washing the system and filters. I hope this information was useful for you - warm up, because winter is coming!
In this article, the editorial board will tell you how to improve the operation of heating systems. We will talk about how to make the radiators in the house warm as much as possible. If you use them for heating in the house, then do it with maximum efficiency.
There are several simple, but very effective ways that significantly increase the heat transfer of radiators. In addition, they are not very expensive, which is a great plus for everyone.
The main problem of low heat transfer is dense curtains that hide “ugly” batteries. Because of this, the air circulation (convection) is disturbed. The airflow is not released enough into the room. It turns out that the radiator warms itself more than the surrounding space.
Also, a large role is played by the great depth of the window sill or niche in which they try to hide the radiator. Everyone here already chooses for themselves. Either hide the “scary” radiator from the eyes, or heat your apartment. We advise you to find some balance, try lighter curtains or make a visual window so that the air freely leaves the radiator.
Instructions for radiators and other heating appliances always indicate the necessary indentations. Do not ignore these instructions, they play an important role in the installation. In addition, the most important parameter is the depth of installation of the battery. This is why the radiator uses its capabilities to the maximum.
The gap from the wall to the rear wall of the radiator shall not be less than 50 mm. The same applies to the distance from the floor - 5 cm at least. Of course, you need to look into the instructions and carefully monitor the distances during installation. In the case when the window sill stands behind the battery, for each centimeter of the projection, the distance to the window sill should be increased by 2.5 cm. In this case, the window sill will not interfere with the proper circulation of warm air.
Reflective screens For insulation of the house, foil screens can also be used. They perfectly improve the efficiency of the heating system. This design is similar to the barrier between the radiator and the wall, which in this case does not take the useful heat on itself. In addition, the use of such a screen increases the temperature regime by 2-3 degrees of heat. And the energy spent on heating is reduced by an average of about 5%.
This method is most often used in practice. Nearly one in three people I know have such foil screens for a radiator. No one has ever regretted this useful acquisition.
Known fact: the efficiency of the dust radiator is reduced by 7-10%. Clusters of dirt and dust have a very negative effect on heat transfer. No matter how banal it may sound, you just need to thoroughly clean the radiator from dust, and then it will be better to heat. In addition, if you monitor the cleanliness of the device, it will last longer.
The bandage can be diagonal, lateral or lower. Maximum heat transfer is provided only by the diagonal garter option. In this case, air passes freely through all sections of the radiator. Also, this method involves the complete absence of areas in which pollution accumulates. Today, the diagonal winding is the most effective way to tie the radiator.
These methods significantly increase heat transfer. In this case, the heating system improves by tens of percent. We also advise to use tips in the complex, for maximum efficiency. By the way, if after this prevention, the radiators still do not heat well, it is worth washing the system and filters. I hope this information was useful for you - warm up, because winter is coming!
Devices that steal our electricity better than sneaky neighbors
A hearty persimmon salad to impress White Metal Bull on New Year's Eve