Presses for plastics, rags and waste paper Bashny.Net

Plastic intended for recycling, it is advantageous to compress before shipment to the factory. Weight is significantly reduced in size (about 1:10), which allows compact to load a large number of raw materials. For the briquetting process uses a special press.

Professional oborudovanii work used designs of several types:

• budget models are compact in size and less productivity;
• industrial equipment – with more power, and is represented in several modifications;
• offers machines for the recycling of solid waste with additional functionality.

On these machines compress plastic scrap, bottles, bags, and even trash. Presented at http://ok-stanok.ru/oborudovanie/pressy equipment is force 4 to 45 tons.

The main elements of the designs in the pressing process involved two plates. The first is movable and is located on top. The lower is always in a fixed position. On that basis place waste. The top plate starts to fall on the bottom with a certain force, pressing mass. After completing the cycle, the movable plate takes the initial position.

The cyclic process is repeated desired number of times to obtain a preform of the required dimensions. The operator removes the workpiece from the machine and performs binding. The maximum dimensions of the bale is 1 m3.

Safe paketinhallinnan presented models are characterized by simplicity of design and operation. For the machine can be a single statement. In this case the worker does not need special education.

1. Compacted waste is easier and more economical to transport.
2. Briquettes are resistant to pourbashiri that simplifies the storage of rags and waste.
3. All moving parts of the press is well insulated and the panels are locked during operation of the equipment. Therefore, for operator permits to find close near the machine.
4. Operate the press in extreme conditions.

Operation of the equipment allows for a wide temperature range. All units have simple construction and are subject to rapid replacement in case of breakage. More professional models feature digital control panels, sensors, automation.