1812
Flower pot with his hands)
Materials:
- A small tin pail;
- Plaster mixture for internal works;
- Mounting grid;
- Marine pebbles;
- A mixture of grout.
Instructions:
1. Take a small tin pail. Doing at the bottom of the bucket drain holes excess fluid.
2. Apply the base (in this case, use ready-made mortar for interior) with a spatula. First one side. The basis is not applied thin and thick, about 0, 4-0, 6 mm.
3. On the basis put the mounting grid. Vdavivaem it a little to the mix. Thus our stones will go to exactly over the entire surface.
4. Begin laying sea pebbles.
5. We reserve the bucket to dry.
6. Fill the mixture for grouting holes between the stones. Excess mixture after drying wash off washcloth soaked in water.
7. enjoy the results!
- A small tin pail;
- Plaster mixture for internal works;
- Mounting grid;
- Marine pebbles;
- A mixture of grout.
Instructions:
1. Take a small tin pail. Doing at the bottom of the bucket drain holes excess fluid.
2. Apply the base (in this case, use ready-made mortar for interior) with a spatula. First one side. The basis is not applied thin and thick, about 0, 4-0, 6 mm.
3. On the basis put the mounting grid. Vdavivaem it a little to the mix. Thus our stones will go to exactly over the entire surface.
4. Begin laying sea pebbles.
5. We reserve the bucket to dry.
6. Fill the mixture for grouting holes between the stones. Excess mixture after drying wash off washcloth soaked in water.
7. enjoy the results!
