267
The tale of how I built a place for cats
Corner kote
What else to occupy themselves?
So I decided to build a scratching post yesterday, what happened and description see below.
Will 50 Picchu!
That's actually for someone tried.
You will need:
1) Plywood 1cm - 550 re
2) the type of rope Rope 1cm thick (60 meters) - 540 ER
3) Self-tapping screws and furniture - was
4) Keep a blanket, my bites was once living with us, the mouse - was
5) Steppler good + 10mm shackle him - was
6) Jigsaw, took a one-time, home - 1000 re
7) Nylon thread, toys for fixing it (later) - 50 pe
8) 1 stick narrow plastic - 30 pe
9) sandpaper - was
10) Scissors and knife work - was
Total: 2170 1170, or if there is a jigsaw + 6-7 hours.
PS: Toys is not fixed, it will be later.
2. Go into the woods and find a dry tree mode for the desired height into 2 parts.
3. DSP had to buy it 550 re also divide it in half.
4. Rope 1cm thickness. Take a dense, not fluffy, not to razlezlas. 60 meters - 540 re
5. Rope for placing toys. 50 re
6. Plastic, narrow. 30 re
7. Furniture Screws, nails, small, self-tapping screws.
8. Engineering bleat, draw a circle using ingenuity and ...
9. ... kote for proportions.
10. Cut, 2 laps.
11. We draw the base (± 5 cm from the edges of the circles, for stability), cut.
12. We have
13. Treat the edges of sandpaper, the preparation of the pillars!
14. Make a notch for ...
15. ... this
16. The first round pierced by nails-circle.
17. Every 7-10 cm turns anchoring rope, so-so.
18. Done Mota, from the other end, repeat step 15.
19. Outcome. Frankly, very cool! It is pleasant to touch, as factory)
20. Cut a hole and treat sandpaper, also gave a second pillar.
21. Primekra and transfer it to his wife. She's cutter.
22. Plastic mode without deeply with one hand.
23. break it completely (by length)
24. Fasten
25. Outcome
26. obbivat below, for the normal type.
27. Golden Section
28. With the second round, the same thing.
29. punched inside here for softness.
30. Subtotal.
31. upholstery base.
32. In
33. Subtotal
34. Cut rectangles and such ...
35. ... fasten them, it legs.
36. It is planned to drill.
37. The drill and fasten.
38. Another subtotal
39. In one of the lounges, fasten the corner, here-so.
40. Fasten beds.
41. Getting upholstery.
42. Intermediate to change the design, namely - strengthening.
43. Make a hole in the rug (where the area is attached), and through the hole and is attached to the corner of the post screws.
44. Outcome.
45. Kote satisfied
46. Very much =)
47.
48. Decorate
49. More.
50. General view. It turned out cool, spent 6-7 hours. It's nice to work well, to be honest.
PS: Toys is not fixed, it will be later.
Source:
What else to occupy themselves?
So I decided to build a scratching post yesterday, what happened and description see below.
Will 50 Picchu!
That's actually for someone tried.
You will need:
1) Plywood 1cm - 550 re
2) the type of rope Rope 1cm thick (60 meters) - 540 ER
3) Self-tapping screws and furniture - was
4) Keep a blanket, my bites was once living with us, the mouse - was
5) Steppler good + 10mm shackle him - was
6) Jigsaw, took a one-time, home - 1000 re
7) Nylon thread, toys for fixing it (later) - 50 pe
8) 1 stick narrow plastic - 30 pe
9) sandpaper - was
10) Scissors and knife work - was
Total: 2170 1170, or if there is a jigsaw + 6-7 hours.
PS: Toys is not fixed, it will be later.
2. Go into the woods and find a dry tree mode for the desired height into 2 parts.
3. DSP had to buy it 550 re also divide it in half.
4. Rope 1cm thickness. Take a dense, not fluffy, not to razlezlas. 60 meters - 540 re
5. Rope for placing toys. 50 re
6. Plastic, narrow. 30 re
7. Furniture Screws, nails, small, self-tapping screws.
8. Engineering bleat, draw a circle using ingenuity and ...
9. ... kote for proportions.
10. Cut, 2 laps.
11. We draw the base (± 5 cm from the edges of the circles, for stability), cut.
12. We have
13. Treat the edges of sandpaper, the preparation of the pillars!
14. Make a notch for ...
15. ... this
16. The first round pierced by nails-circle.
17. Every 7-10 cm turns anchoring rope, so-so.
18. Done Mota, from the other end, repeat step 15.
19. Outcome. Frankly, very cool! It is pleasant to touch, as factory)
20. Cut a hole and treat sandpaper, also gave a second pillar.
21. Primekra and transfer it to his wife. She's cutter.
22. Plastic mode without deeply with one hand.
23. break it completely (by length)
24. Fasten
25. Outcome
26. obbivat below, for the normal type.
27. Golden Section
28. With the second round, the same thing.
29. punched inside here for softness.
30. Subtotal.
31. upholstery base.
32. In
33. Subtotal
34. Cut rectangles and such ...
35. ... fasten them, it legs.
36. It is planned to drill.
37. The drill and fasten.
38. Another subtotal
39. In one of the lounges, fasten the corner, here-so.
40. Fasten beds.
41. Getting upholstery.
42. Intermediate to change the design, namely - strengthening.
43. Make a hole in the rug (where the area is attached), and through the hole and is attached to the corner of the post screws.
44. Outcome.
45. Kote satisfied
46. Very much =)
47.
48. Decorate
49. More.
50. General view. It turned out cool, spent 6-7 hours. It's nice to work well, to be honest.
PS: Toys is not fixed, it will be later.
Source:
