How to sew a pleasant sock 3D mask that does not press your ears Bashny.Net

It seems that the coronavirus will not be finished soon. Therefore, wearing protective masks remains relevant indefinitely. And real needlewomen often refuse to buy thin masks in pharmacies, and build themselves protective devices with their own hands. Today's edition. "Site" It will tell you what a good protective 3D mask And how to sew it at home in just a few minutes.



3D Mask Why is it worth sewing a 3D mask? Because she sits comfortably on her face. This mask does not slip from your nose when you are talking or yawning. It does not fit too tightly to the face, so it is relatively easy to breathe in it.

When you build a mask yourself, you can choose the right size, and a comfortable rubber band, and the type of fabric you like. In addition, the pattern can be chosen absolutely anyone. And if the mask is sewn for a child, then you should tinker and pick up cute patterns that will please him.

Homemade 3D masks do not take up much space. They are easy to fold to hide in a bag or backpack. And although at first glance sewing such a mask seems difficult, but in fact everything is very simple. Below we will tell you what and how to do.



If you need to sew a mask for an adult, you should take a rectangular piece of fabric 25×30 cm. If the mask is for a child, then you already need to look at the dimensions of 20×30 or even 18×28 cm.

1. First of all, fold a piece of fabric twice (front side inside). We're going down the iron line.
   
   
   
   
2. On each side note 4 cm. We cut off the corners.
   
   
   
   
3. We're laying lines all over the perimeter. We leave only a small area (a couple of centimeters below) intact so that the mask can be turned out.
   
   
   
   
4. Carefully twist the mask and sew the previously left hole (the same couple of centimeters). Walk through the fabric with an iron and fold the upper and lower parts of the future mask corners to the center. Iron.
   
   
   
   
5. On the upper and lower sides of the mask, we lay along a line with an indentation of 2-3 mm. On the right edge, we apply a rubber band, close with a cloth and sew. We do the same thing on the left.
   
   
   
   
6. All that remains is to tie the rubber band and try on the mask.
   
   
   
   

Such a mask is sewn very simply, and the result will please everyone. After all, the protective device reliably covers both the nose and the chin, and will last for a long time. And although I do not want to wear even the most comfortable masks, but for now it is necessary. Wear masks and take care of yourself.

https://www.youtube.com/watch? v=il_M9CYVR-4