526
How to create a cucumber
1. At the first stage on the lower parts of the plant in the axils of 3-5-leaf is blind. Deletes all of the ovary and shoots, which are formed in the axils of these leaves. This is necessary in order for the plant sent all their forces for the formation of the root system, which could further "feed" the entire plant.
2. The next stage in the axils of the next 3-5 leaves residual ovary, the side shoots being removed.
3. Next comes all the same, but in addition to allow ovaries to grow and the side shoots, which after formation of the first sheet primitives.
4. The next tier of 3-5 leaves leave for side shoots already 2 leaves, then 3, even higher 4.
5. Upon reaching the top of the upper growth point, carefully wrap 2 times a stalk of a plant around a suspension cable and lowered the top down and give a little to grow the stalk. Somewhere in the 1 meter from the surface of the beds the tip primitives. Forming is completed.
6. In recent years, displayed a variety of hybrids of cucumbers with fruit (beam) ovary. That is, in the axil of each leaf is formed by a number of pickles. But this feature has manifested itself in full, you need a different render. At the initial stage of the forming as described above.
But further forming lead strictly a single stem, all side shoots on the main stem are removed.
7. And if you give each plant a large area power (at least 1.5×1.5 m), you can use the following method. Each side shoot we tied separately and dissolve them in different directions. You need to follow in order to top the shoots did not primenyali the bottom, "blind" in this case, 6-7 lower sinuses. We need to establish a strong root system to feed such a cucumber tree.
Hardwood floors for home how to transform it into a masterpiece of design
How to determine a good day for planting
Those who consider it difficult, these methods of forming, it is necessary to pay attention to the seeds of the company "Bioengineering". The distinctive features of these hybrids is the limited growth of side shoots (2-4 internodes), and some, and the complete lack thereof.published
Source: vk.com/dacha.life?w=wall-83256656_30199
2. The next stage in the axils of the next 3-5 leaves residual ovary, the side shoots being removed.
3. Next comes all the same, but in addition to allow ovaries to grow and the side shoots, which after formation of the first sheet primitives.
4. The next tier of 3-5 leaves leave for side shoots already 2 leaves, then 3, even higher 4.
5. Upon reaching the top of the upper growth point, carefully wrap 2 times a stalk of a plant around a suspension cable and lowered the top down and give a little to grow the stalk. Somewhere in the 1 meter from the surface of the beds the tip primitives. Forming is completed.
6. In recent years, displayed a variety of hybrids of cucumbers with fruit (beam) ovary. That is, in the axil of each leaf is formed by a number of pickles. But this feature has manifested itself in full, you need a different render. At the initial stage of the forming as described above.
But further forming lead strictly a single stem, all side shoots on the main stem are removed.
7. And if you give each plant a large area power (at least 1.5×1.5 m), you can use the following method. Each side shoot we tied separately and dissolve them in different directions. You need to follow in order to top the shoots did not primenyali the bottom, "blind" in this case, 6-7 lower sinuses. We need to establish a strong root system to feed such a cucumber tree.
Hardwood floors for home how to transform it into a masterpiece of design
How to determine a good day for planting
Those who consider it difficult, these methods of forming, it is necessary to pay attention to the seeds of the company "Bioengineering". The distinctive features of these hybrids is the limited growth of side shoots (2-4 internodes), and some, and the complete lack thereof.published
Source: vk.com/dacha.life?w=wall-83256656_30199
