438
Nautilus in "20,000 leagues under water"
31 will now be shot with a small description, Via RC Sub
This post is dedicated to the construction of a scale model (1:32) of the submarine "Nautilus". The idea came from a fan from Florida, inspired by the film studio Disney.
March 18, 2009: Start of the tab. The hull will be a long 66 and a half inches (166 to 25 cm). Package:
Details
Wheelhouse
Deck mounted on fiberglass hulls
Part of the hull
Again, cutting, another angle)
31st March 2009: Work in full swing!
Lead rubble was placed in a lower compartment. The lower the keel is hollow, for the account of the center of gravity to help the most, the natural static stability. The two halves of the glass required a good preparatory work.
Screw band, of course, according to the old drawings
Control unit
The lower part of
Housing
Go ahead)
...
...
...
...
23 June 2009: The Time passes, the construction in progress. The remaining 14 days of construction estimates. The process went without a hitch, in principle. The project used compressed air cylinders, there is a reason even for liquefied natural gas.
Electric motors. Powered by 14.4V NiMh batteries with 4.5 Ah capacity, housed in the front compartment of the boat.
Nautilus -radioupravlyaemy.
...
...
...
...
...
...
...
...
...
...
...
...
...
The final picture, Thank you for your attention
Source: ">