How to build roads in Russia?

How do we build roads from scratch?

Will be 66 photos





In the small town of Zhukovsky, Moscow region that once was required to build a new road podeznuyu.
1. In place of the woods there is a way.



2. Please make the felling.



3. stored.



4. to clear away.



5. supply mains.



6. With the help of foreign cars paving vertical collectors.



7. Buryat underground utilities under the future road.



9. screed.



10. Buried collectors.



11. Rest.



12. Organize protests against the road.



13. build the future interchanges.



14. Fill in support of the future bridge.



15. Mount the support.



16. Pour the support.



17. A temporary canopy over the span of the bridge to the future roundabout.



18. lay the foundation for metal poles illuminate the road.



19. Assemble a temporary structure for supporting the guide, which will be cast overlap between the pillars of the bridge.



20. Install the guide, which will be put formwork for casting the bridge spans.



21. The construction of the frame beneath the fill.



22.



23.Vse stormwater runoff from the road by gravity fall into the plastic collectors autonomous sewage pumping station. It is located at the lowest point of the road to stormwater flowed by gravity. Next on the discharge manifold stormwater pumped into the city's storm drains for disposal. The second is this sewage plant will be located in the territory of GSK "Aviator" between the supports of the bridge.



24. Match for construction equipment and see paver Vögele.



25.



26. We see some kind of drill.



27. The hopper for receiving the asphalt paver "Fёgele Super 2100".



28. Below is seen a conveyor which delivers the asphalt on the auger screw puts asphalt.



29. The Russian know-how of German asphalt paver - takeaway standard lights for better lighting and auxiliary lights.



30. Asphalt has a rubber-metal tracks.



31. Power supply cables for additional equipment.



Source: ">