How to remove the disk from the Bulgarian, if there is no key at hand Bashny.Net

How do I remove a disk from a Bulgarian? This is quite a popular question for masters of all trades, because the tool is not easy and sometimes not everyone can unscrew the disk. When interacting with a corner grinder (USM), it is fundamentally important to work in protective equipment, because, for example, the disk can bite. It will be very good if it does not collapse or fly away with the tool. But we hope that the situation is not so unstable. So how do you remove a disc from a Bulgarian?



First, the Bulgarian must be disconnected from electricity. This is logical, but for security reasons it is better to mention it again. Secondly, the disc can usually be unscrewed by hand. But why isn't it working now? Many professionals believe that the disk before work need to tighten It's pretty close. They believe that this will improve the fixation of the metal circle on the tool, which means it is safer.

But that's not exactly true. Additional fixation this does not add, but the circle will tighten so that hands just can not remove. It's moving. special key for this case. Unfortunately, sometimes such a key is not an assistant, because it often flies, and sometimes even bends in the process of work.

748910

The situation can be corrected by a diluted (gas) key. It is usually used while working with pipes, but here it can help. This tool will definitely help to free the disc from the clutches of the Bulgarian, but it can also damage the disk fastener on the USM. Working with that key here. needs to be carefully.



Cunning way Master Vova Poltavasky on the same YouTube channel advises to work with Bulgarians with a certain type of nut. He is sure that a solid nut will contribute to excessive delaying. corner-wire. As you already know, this is not very necessary when working with a Bulgarian. After all, such a nuance may well provoke a traumatic situation.

about:blank

The wizard recommends to buy a nut that will fix the disk, but at the same time and just unscrew. It's not difficult. find out Or ask for help from sales consultants. They will be happy to tell you which nuts are better to choose for trouble-free work with the Bulgarian in the future.



How to remove the disk from the Bulgarian easily and quickly But imagine that the disk is already difficult to unscrew, and the key is not at hand. So what do we do in this case? Be sure to wear tight gloves before testing such a life hack. So, with one hand you need to press the spindle lock button (or the lock button). This will fix the mechanism of rotation of the disk in a stationary state. Then gently place your palm on the CCM disc.



Now a sharp, but not too strong blow of the hand walk across the disk corner grinder. This will help to release it due to the force applied during the palm impact on the disc. Undoubtedly, it must be done wisely. That such an effort was enough to unscrew the disk, but also that the palm remained intact. And do not forget that during all manipulations you need to pinch the lock button.



Such a simple life hack can help solve a really difficult problem. But do not forget that the Bulgarian is a dangerous tool. Always work with her in protective gear, use special glasses or eye shield, do not forget about gloves. Good luck with your work., jack of all trades.