37
Why do bottles with dispensers in our family do not throw away
And we have a minute of home crafts with our own hands. Take it. pump Which can be very useful to you in your normal life. Wash before any manipulation, of course.
Although we will tell you more later. Let everything be in order. Do you have a garage or cottage with an old washing machine? Is it hard to lift? It is for this unit that our current life hack will be useful.
So, old washing machines often sin because they are not equipped with excess water. Before it was and is not necessary: washed things, got out, excess water left, but the remains, at the bottom of the car ... They did not bother anyone and took part in the subsequent work of the unit.
Then this gap in the system was corrected in subsequent generations of washing machines, and everything went as usual. Old cars broke down rarely because of high-quality and simple design, and therefore did not throw away, but sent, for example, to the country.
That's where the problems started. Remains of water idle in the mechanism for a long time. This led to at least two serious consequences: rust and engine failure or related details. The fact is that the cottage without owners, as you know, is not heated. In winter, water turns into ice, which expands very actively (about 10% of the volume). This process can even damage the machine drum.
In short, the water inside the machine can not be left. But the old copies are quite large and weigh a lot. Just roll over and wait for all the water to merge, probably. But this is only possible for a few men with remarkable physical abilities. And the desire to once again tinker with the technique.
Everyone else has to come up with something smarter. For example, ordinary people can help. douche. Yes, she is. Attach an ordinary plastic tube to it and release air, creating pressure inside the rubber pear. Then place the protruding end of the tube in the inside of the machine and pump out the water.
Yeah, that sounds funny. Yes, the syringe itself must be impressive in size to accommodate more water. And even too long tube will reduce efficiency. So this method is suitable for cases where the water is at a close distance from the hole. But it works. If something looks stupid but works, it can be used.
Do not worry, for those who do not have the desire to go to the pharmacy for a huge douche but want to get rid of excess water in the washing machine, there is an alternative way. Carefully inspect the bathroom. There is probably stored a whole bunch of different bottles, bottles and similar containers from various cleaning products.
Look carefully and get the bottle with the dispenser. That's what you need. First of all, get rid of the bottle itself and wash it properly. dispenserTo see if it works at all. Now put a couple of those on. plastic length of 30 cm to different ends of the dispenser. The “native” tube that supplied liquid through the dispenser should be carefully removed.
When the tubes are in their places, just use the former dispenser as a pump: the tube, sucking liquid, install inside the washing machine, and put the opposite in any container convenient for you. And pump water. Volumes, of course, not too large, but for your purposes it is quite suitable. Just don't use the sprayer. He is not suitable for this business - too weak.
Such a “pump”, made with your own hands, can be useful for the household at any minute: in fact, if you need to pump excess fluid from hard-to-reach places, you can not find better devices. For example, rainwater in the same country often falls into old windows, into the space between the glass. And there, of course, leads to fungus and rot. Your handicraft will solve this problem for once. At the same time, materials for her, you know, are worth nothing.
Why else would such a mechanism be needed? For example, motorists will say thank you when you need to pour something from the tank of the car. At least oil or rainwater. But we're sure that's not all. Surely your imagination will tell you where else in the household such a pump will be useful. We hope you appreciate the idea and share it with your friends. Good experiments!
Although we will tell you more later. Let everything be in order. Do you have a garage or cottage with an old washing machine? Is it hard to lift? It is for this unit that our current life hack will be useful.
So, old washing machines often sin because they are not equipped with excess water. Before it was and is not necessary: washed things, got out, excess water left, but the remains, at the bottom of the car ... They did not bother anyone and took part in the subsequent work of the unit.
Then this gap in the system was corrected in subsequent generations of washing machines, and everything went as usual. Old cars broke down rarely because of high-quality and simple design, and therefore did not throw away, but sent, for example, to the country.
That's where the problems started. Remains of water idle in the mechanism for a long time. This led to at least two serious consequences: rust and engine failure or related details. The fact is that the cottage without owners, as you know, is not heated. In winter, water turns into ice, which expands very actively (about 10% of the volume). This process can even damage the machine drum.
In short, the water inside the machine can not be left. But the old copies are quite large and weigh a lot. Just roll over and wait for all the water to merge, probably. But this is only possible for a few men with remarkable physical abilities. And the desire to once again tinker with the technique.
Everyone else has to come up with something smarter. For example, ordinary people can help. douche. Yes, she is. Attach an ordinary plastic tube to it and release air, creating pressure inside the rubber pear. Then place the protruding end of the tube in the inside of the machine and pump out the water.
Yeah, that sounds funny. Yes, the syringe itself must be impressive in size to accommodate more water. And even too long tube will reduce efficiency. So this method is suitable for cases where the water is at a close distance from the hole. But it works. If something looks stupid but works, it can be used.
Do not worry, for those who do not have the desire to go to the pharmacy for a huge douche but want to get rid of excess water in the washing machine, there is an alternative way. Carefully inspect the bathroom. There is probably stored a whole bunch of different bottles, bottles and similar containers from various cleaning products.
Look carefully and get the bottle with the dispenser. That's what you need. First of all, get rid of the bottle itself and wash it properly. dispenserTo see if it works at all. Now put a couple of those on. plastic length of 30 cm to different ends of the dispenser. The “native” tube that supplied liquid through the dispenser should be carefully removed.
When the tubes are in their places, just use the former dispenser as a pump: the tube, sucking liquid, install inside the washing machine, and put the opposite in any container convenient for you. And pump water. Volumes, of course, not too large, but for your purposes it is quite suitable. Just don't use the sprayer. He is not suitable for this business - too weak.
Such a “pump”, made with your own hands, can be useful for the household at any minute: in fact, if you need to pump excess fluid from hard-to-reach places, you can not find better devices. For example, rainwater in the same country often falls into old windows, into the space between the glass. And there, of course, leads to fungus and rot. Your handicraft will solve this problem for once. At the same time, materials for her, you know, are worth nothing.
Why else would such a mechanism be needed? For example, motorists will say thank you when you need to pour something from the tank of the car. At least oil or rainwater. But we're sure that's not all. Surely your imagination will tell you where else in the household such a pump will be useful. We hope you appreciate the idea and share it with your friends. Good experiments!
Banana biscuit so that good Bull stays overnight on New Year's Eve
New hair ties that are taken apart with hands and feet on the first day of delivery