142
Hamann Z4 M Coupe Race Taxi
The tuner Hamann presented the car of charged HAMANN Z4 M Coupe Race Taxi.
Sports car HAMANN Z4 M Coupe Race Taxi is based on already of charged Hamann Z4 M, where, after reprogramming the electronic control unit, modifying the intake and exhaust systems, the masters Hamann was able to increase the power to 358 horsepower (standard - 343 power) and peak torque to 385 Nm (serial cr / torque 365 Nm). Complementing the modification of the powertrain removal of electronic maximum speed limiter, which ultimately allows speeds of up to 275 km / h (serial model 250).
In addition to program improvements of the power unit, the tuner Hamann also offers a special steel exhaust system with sport catalysts and steel manifold (with greater capacity), which ends with four 76mm pipes - two on the right and the left.
Stabilize and secure the dynamic HAMANN Z4 M Coupe Race Taxi for high speeds on highways, helps set of sport springs of Hamann (alternative - sport helical gear), which reduces the ground clearance approximately 25 mm high-performance braking system, and a special welded frame security which was located in the cabin and underscores its unique sporting arcs PR. Further, the tuner also offers a special two-particle spreader, both the front and to the rear, as well as packet stabilizers.
To contribute to the change in appearance HAMANN Z4 M Coupe Race Taxi, designers decided due to its original design lines body kit. The front part has become more daring features of the powerful at the expense of the front bumper and additional air inlets and circular fog lights, as well as special shaped brows for headlamps. A smooth transition to the rear side emphasized Channel bar with additional air intakes for ventilating the rear brake system. As for the tail section, there is a demonstration of the original solution is determined by fusion into one bumper with an additional double-spoiler lip and the diffuser. Also, it is worth noting and two additional spoiler, one of which was placed on the trunk lid, and the other has found its place on the roof.
To contact HAMANN Z4 M Coupe Race Taxi with the track, tuner Hamann offers a set of exclusive equip its drives in 5-spoke design series PG3, which are provided in the 19 and 20-inch format. Thus, the front axle Hamann Z4 M can be equipped with 8, 5 J x 19-inch wheels with 235/35 tires, while the rear 10 J x 19-inch with 265/30 tires. An alternative is to drive a 20-inch format with tires of the dimension 235/30 front and 285/25 rear.
Top one for this model can be regarded as design mnogospitsevye wheels in series Anniversary I, which are also provided, as in the 19 and 20-inch format. Thus, the front axle Hamann Z4 M can be equipped with 8, 5 J x 19-inch wheels with 235/35 tires, while the rear 10 J x 19-inch with 265/30 tires. An alternative is to drive a 20-inch format with tire dimension 235/30 front and 285/25 rear.
Source:
Sports car HAMANN Z4 M Coupe Race Taxi is based on already of charged Hamann Z4 M, where, after reprogramming the electronic control unit, modifying the intake and exhaust systems, the masters Hamann was able to increase the power to 358 horsepower (standard - 343 power) and peak torque to 385 Nm (serial cr / torque 365 Nm). Complementing the modification of the powertrain removal of electronic maximum speed limiter, which ultimately allows speeds of up to 275 km / h (serial model 250).
In addition to program improvements of the power unit, the tuner Hamann also offers a special steel exhaust system with sport catalysts and steel manifold (with greater capacity), which ends with four 76mm pipes - two on the right and the left.
Stabilize and secure the dynamic HAMANN Z4 M Coupe Race Taxi for high speeds on highways, helps set of sport springs of Hamann (alternative - sport helical gear), which reduces the ground clearance approximately 25 mm high-performance braking system, and a special welded frame security which was located in the cabin and underscores its unique sporting arcs PR. Further, the tuner also offers a special two-particle spreader, both the front and to the rear, as well as packet stabilizers.
To contribute to the change in appearance HAMANN Z4 M Coupe Race Taxi, designers decided due to its original design lines body kit. The front part has become more daring features of the powerful at the expense of the front bumper and additional air inlets and circular fog lights, as well as special shaped brows for headlamps. A smooth transition to the rear side emphasized Channel bar with additional air intakes for ventilating the rear brake system. As for the tail section, there is a demonstration of the original solution is determined by fusion into one bumper with an additional double-spoiler lip and the diffuser. Also, it is worth noting and two additional spoiler, one of which was placed on the trunk lid, and the other has found its place on the roof.
To contact HAMANN Z4 M Coupe Race Taxi with the track, tuner Hamann offers a set of exclusive equip its drives in 5-spoke design series PG3, which are provided in the 19 and 20-inch format. Thus, the front axle Hamann Z4 M can be equipped with 8, 5 J x 19-inch wheels with 235/35 tires, while the rear 10 J x 19-inch with 265/30 tires. An alternative is to drive a 20-inch format with tires of the dimension 235/30 front and 285/25 rear.
Top one for this model can be regarded as design mnogospitsevye wheels in series Anniversary I, which are also provided, as in the 19 and 20-inch format. Thus, the front axle Hamann Z4 M can be equipped with 8, 5 J x 19-inch wheels with 235/35 tires, while the rear 10 J x 19-inch with 265/30 tires. An alternative is to drive a 20-inch format with tire dimension 235/30 front and 285/25 rear.
Source: