Bed for child

Children grow up, and it can not but rejoice. But, oddly fight British scientists, cribs do not grow, despite the fact that they are watered and sometimes, sorry, fertilize.

That's my fighter rose to 4 years and a cot-meter length of twenty he became not a child closely - will not extend the hand, which is there to "geese potyagusi"?

PS. The first personal post. kick safely, but then, as long as patient, is 40 images.





My wife and I walked several furniture centers, and concluded - we must build their own bed. We did not find this to be suited to our requirements:

1) without chipboard and MDF, solid wood only, plyuc can be a bit of plywood. All taki for the child. Even to the "imported super-green" chipboard my genetic mistrust.
2) The rim should be! Let the little, but should, otherwise the baby will fall out of bed at night - check overnight with relatives.
3) Size - not less than 160x70, no more than 190x80 - is dictated by the size of the available space for the bed and common sense.
4) Bottom - should be roomy drawers. Studio apartment - is wrong when so much space is wasted.
5) The price - not more than 20.000 p. with good orthopedic mattress

Viewed sorts folding sofas, beds, sofas, ottomans ...
Either chipboard or couch without skirting and non-removable mattress of incomprehensible-what devils, or boxes of tiny or no, or is dofiga, but still something is not quite right. Nothing selected.

I went to the famous white-green and bought: furniture boards, aluminum parts, screws of different lengths, castors for boxes and so, on a trifle - nazhdchka, some drills, which the farm was not enough.

At the end of calculated - bed fully costed 8500 rubles plyuc bought a good mattress made of coconut coir for 7500 rubles. Total 16 000.
01 Here, the initial material. Grating foundation decided not to think - bought ready for 1600 rubles from the online store, where the mattress ordered. You could do a sheet of plywood, saving about 1,000 rubles. The size of the base and mattress 180x80 cm. Will the royal box for the little tomboy!



02 mark.



03 Gently sawed. Jigsaws difficult to stand perfectly straight line, but I tried. Place the cut paper tape stuck to less bullied fiber, on the advice, which is deducted immediately, on Yap. Checked - helps.



04 However, Scotch quickly ran out and then cut without it. The main thing - not to saw the stool! ))



05 actively using improvised materials for depiction of complex shapes.
It is in the front ledge - deepening to a small climb itself. Yes, and very convenient for him to sit on the bed in this place.



06 Oh, how! Before cutting it was a big billboard 200h60h2.8 see.



07 Come on, cut corners. They, too, were 2 meters, and I have to 180 cm. 20 cm cut from each.



08 dig up holes zinkovochku have not forgotten, though like and do not need it there, everything will be under the cap screw.



09 is screwed. This is the inside of the front piece. In this corner will lay the foundation for a mattress. First fastened by 4 screws, then I thought, and even screwed 4 for reliability. Although so like it was hard ... but as self-tapping screws with a stock purchased - not sorry ...)



10 Death Defying Acts. All laid on its side, as it should be. While nothing is screwed, pihnёsh -rassypletsya. In this state, I started to dig a hole and twist the shield. For angles frankness replied Great Perhaps and perfectly rectangular lattice mattress.



11 I'm going to curl Furniture screed. For what has bought a special drill - a cool thing, it saved me a lot of time.



12 The first hole is a tie.



13 The first tie in the hole.



14 Then all the same - not fotkal. Here is the result - a fully twisted bed.



15 are rated on a bed place and put the mattress inside. Everything safely - no creaks, no wobbles.

The panel at the bottom of the charge of a place on their future, and not to interfere in such a way to block the hole.
In this condition, the baby slept through the week, as during the week there was no time to engage. And for the week transpired one downside. Save without headboard uncomfortable because:

dream child can toss and turn and, lifting his head from the pillow, lower it to the rim - he was short, only 10 cm. lump - not a lump, but a pleasant enough. theoretically, the pillow may fall, passes through the rim (this, however, was not) with low sides and without the head - quite uncomfortable to sleep lying on the table. Sam lay down and immediately felt it.



16 Therefore I went to the famous store again and bought another 2 small furniture panels on the headboard. And sawed them like that. The largest - back, two identical smaller - the sidewalls, the smallest - scrap.



17 came up with the shape of the head.



18 This is the back. I drank half, then mirror the second half, for symmetry.



19 Oh, and then I namuchalsya with this place but with sandpaper



The sidewall 20 Peel back window. It is more technical than beauty - there I will mount to the side of the bed.



21 sawed in the bathroom. His wife, the love of my life, stoically endured the new decorative coating of all that was in the bathroom, wonderful fragrant spruce dust.



22 of the handy tools for showing off curves.



23 And again. This is not the soil of Phobos run here because accuracy is needed !!!



24 is twisted.



25 It poked a little bit, drill from the inside of the window is not crawl. Holes drilled from the bottom up with a drill, but a place under the bonnet of the furniture had to twist the ties by hand. Well soft wood tree, is not so difficult.



26 That something like this. When drawing - me straight liked these ovals. In the real world it is not so nice it turned out, but the child likes, performs his functions. Child plays before bed - along with hiding the headboard and looking out the side window - pleased with your "house".



27 This again pause. Completion postponed for another week, until next weekend.



28 next weekend - time to make drawers and legs. He took a scrap of the end panels, the width of ~ 19 cm.



29 sawed like these legs.



30 Here begins a mystic, then explain. I sawed the legs of corners.



31 So they will I have to stand and be secured to the bed in the corner.



32 feet in place.
WHY WHY WHY I chose such a strange method of attachment legs - I do not know. The question "why?" I asked everyone to whom I then showed his creation. Why do not I just screwed them on the bottom of the screw length - a mystery to me. I think the neighborhood level 80 mage afflicted me damage. Truly a strange solution.

I have no words, comrades. About the screws I have not even for a second did not think - so here and so, as it is on the corner.



33 move on. The lower half of the front piece - we 2 weeks ago just to put to bed - is strictly sawn in half.
Of the two sheets of plywood (12 millimitrovoy) cut sides and bottom two boxes.
The whole thing is made up somehow together for clarity.



34 Yes, I love corners.
Sawed and drilled them in the bathroom.
His wife, the love of my life, stoically endured the new decorative coating of all that was in the bathroom, wonderful, high-grade aluminum dust. Good thing for the past week I had the bathroom to wash the dust from the wood and the aluminum would have looked not so impressive.



35 Twist



36 Established wheels



37 tries on until no facades. They go well, despite the fact that they need to call on the carpet with linoleum. Load the boxes on the full - still go easily. The diameter of the wheel 4.5 cm



38 How will avtobotanik, door hung facades.



39 Good night!



PS. Behind the scenes it remains the most dreary part of the work - grinding sharp corners and edges of the sandpaper. First rough, then smaller.
This work I, unfortunately, did not think to spend in the bathroom and made from garbage. Sorry, there was eventually polusanimetrovy thinnest layer of sawdust. And the smell !!! DSC in your home. Half an hour later washed the stairs.

And honestly - I would know that would be so dusty - cutting wood and over, and grinding suffered to the dacha. Honestly, for this is not a pity to bring their entire material. Washing was dreary, especially in the bathroom. Do not do that! )

Total spent 16 thousand rubles in view of sufficiently good mattress.
And three days off for 3-5 hours. (Works only on Saturdays and on Sundays rested)

It is without much straining can be done in a weekend, but if you first think, and then to do, not vice versa, as I have done.

And cut plywood and boards is better to order directly in the store. In the shop where I bought, there is such a service - 30 rubles cut, fast, perfectly straight and accurately in size. I did not, because dolt should first calculate the exact dimensions of all the necessary details, and then go to the boutiques. And at first I figured about, and after buying began calculating millimeters to centimeters.

That's all, the report is finished. )

Source: ">