1983
BELAZ 75138
Dump trucks BelAZ-7513 carrying capacity of 130 tons are designed for transportation of overburden and minerals in open mining and soil on the construction. Dump trucks are designed to operate on specially equipped road with the greatest longitudinal slope of 6 - 8%.
Dumpers designed for operation at ambient temperatures from minus 50 to 40 0 C, relative humidity up to 80% at 20 0C, dusty air up to 0, 6 g / m3, the wind speed up to 20 m / s and in areas located at an altitude of up to 2000 m above sea level, with a corresponding change in traction and dynamic qualities. To improve performance, we recommend dump their operation in conjunction with excavators bucket capacity of up to 12, 5 m3.
Option truck uglevoza-75138 is designed for transportation of coal and other bulk cargo with a low specific gravity. It differs from the basic platform trucks having a large capacity.
I begin the test assembly hearts truck - Engine Cummins KTA50-C. 16 cylinders, 2 turbines, 1620 "horses", 6292Nm of torque. And all this is to drive an electric generator.
The paper scan engine took a little more than a sheet of A4. That's what managed to gather.
Here the engine until all - parts ran smile. Everything unfolded glued.
I start assembly of the frame (now I began to represent the scale of the offense smile). The side walls of the frame with stiffening ribs.
Hi. That went to the paper whiter. Assembled frame motors and generators.
Slowly, and I continue to assemble. Started the front frame. The wheels turn and rotate.
He began to torment wheel
I decided to relax until the wheels. Added radiator
Switched to the cockpit ...
glued body
Rear Axle
Well, I put the frame on the axis
Small continued - gradually add equipment plumage. Ready ventilated box with resistors and bellows.
engaged in distributing hoses and tubes
Examples of body
Source: only-paper.ru
Dumpers designed for operation at ambient temperatures from minus 50 to 40 0 C, relative humidity up to 80% at 20 0C, dusty air up to 0, 6 g / m3, the wind speed up to 20 m / s and in areas located at an altitude of up to 2000 m above sea level, with a corresponding change in traction and dynamic qualities. To improve performance, we recommend dump their operation in conjunction with excavators bucket capacity of up to 12, 5 m3.
Option truck uglevoza-75138 is designed for transportation of coal and other bulk cargo with a low specific gravity. It differs from the basic platform trucks having a large capacity.
I begin the test assembly hearts truck - Engine Cummins KTA50-C. 16 cylinders, 2 turbines, 1620 "horses", 6292Nm of torque. And all this is to drive an electric generator.
The paper scan engine took a little more than a sheet of A4. That's what managed to gather.
Here the engine until all - parts ran smile. Everything unfolded glued.
I start assembly of the frame (now I began to represent the scale of the offense smile). The side walls of the frame with stiffening ribs.
Hi. That went to the paper whiter. Assembled frame motors and generators.
Slowly, and I continue to assemble. Started the front frame. The wheels turn and rotate.
He began to torment wheel
I decided to relax until the wheels. Added radiator
Switched to the cockpit ...
glued body
Rear Axle
Well, I put the frame on the axis
Small continued - gradually add equipment plumage. Ready ventilated box with resistors and bellows.
engaged in distributing hoses and tubes
Examples of body
Source: only-paper.ru
