Squirtwoman from lighters to 1.04. 10 minutes

I remembered how we, in high school, did bryzgalki of disposable Chinese lighters.

This process will be mastered by any armless or rukozadnitsa etc.
We need
 - Actually lighter, better clear to see the water level inside;
 - Pliers;
 - Disposable syringe, 5 ml is sufficient
 - Stem from a ballpoint pen;
 - Knife.





Parse lighter throw Circuits are circled in red



Try on the rod, crop and vpihivaya inside to push hard, but it's good, would not be able to fall inside. After that, we collect all back. Reservation, I have the first time did not work, I made out the valve and cleared burner assembled, everything worked fine

Posted in [mergetime] 1364643752 [/ mergetime]
Now we need to remove the needle from the nozzle, it is necessary to pull !!! it does not break off and pull out with pliers, needle throw, too, we need only head.
We put the nozzle to draw water into the syringe.
To fill the need to adapt himself a little, but the process is mastered fairly quickly.
So to fill with water: click on pedal'ku lighter, syringe firmly put to the torch smoothly and slowly refueled.
Another thing you should not twist the valve tight, a little screw, a couple of turns, it will fill it. A stream of such bryzgalki off with quite a strong pressure, I wet the ceiling after the tests and attempts to photograph.
That's all.



P.S. Tits and the carpet just in case



Source: ">