Restoring Lancer (52 photos)

If all the grandmothers who run across the track anywhere, threw off their pensions used the fund to pay for repairs of cars affected by their mad sprints ...

If all young patsanchiki on older boomers could reduce the average speed around the city with 120 ...

If Lancers pieces of ordinary RZD-rails were welded to the side members, instead of flimsy amplifiers bumpers ...

This sandwich would not be ...






Ass car warped to some smiley



Waves on the wing



Flimsy power rear bumper



And the front too ... flimsy



Throws the poor guy on the stand
And understand it to start work



Waves at the bottom of the spare wheel compartment and clamped



Here the tumor will have to be cut, delete



It comes directly understanding that we need a donor like this here:



Him and bring quickly enough from the suburbs
Here's how neatly on the back of the nugget otsverlen of unbeaten original Mitsu



Chainsaw ... just kidding ... Bulgarian snap off at the back of the car



Somehow we do wedding limos, when asked: remove the back panel - and then welds elongation and the back cover with the back of the beam and the suspension spread to several meters back ...
But this time, the owner has decided not to make a wedding limousine from his Lancer



In the hole insert a donor organ, and we catch him a few points of welding to draw and expose gaps had the opportunity



Hydraulic pull-up, anchoring welding



We put an entire boot lid, tightens finally all gaps



On the right side are also exhibiting all millimeters



And brew



Waves on the wing clean, obabatyvaem welded seams



Sealants are passed at the seams



Zadok ready



We dropped a crumpled front bumper amplifier and begin to pull the runaway spars



Next, try on a booster when things tightened - he stands up well to their rightful seats on the longitudinal members



Squeeze a "TV" instead of mint panel, here it is red for the amplifier
We try on body parts and put out all the gaps in the face Lancer



Car drives away in training, meanwhile battery lain next to the car during the body work - finally sat down, his booster enliven



Aligns the side of the vehicle at ground



It is this part of the back of the sealant - will be covered with fresh paint



To drive in the camera and to the full otkrasa car - repair places has already been set back panel



Irregularities of sealants and vyshtampovok should also be on the factory car - all leave



Beautiful turned back panel, varnish is applied here is not in the factory - we do it without varnish



Then the rest of the body gruntuem



And is ready for painting



Rolls into the camera, degrease all surfaces



Paste



And color



Power straight from the tin



All attachments, as it should be - paint separately



Suspended the so-called "helicopter" - could come to paint the inside of the parts



But already otkrashenny body collect



Chuck



Doors collect



And the back of the car with the trunk



Because of surprises - even shattered muffler while accident



Replace our slesarke



And here I am ready mitsubiska:



Lancer pulling out of a sandwich in nature: