How to seal a crack on the glass with their hands, clearly and understandable.

None of the motorists are not immune from minor troubles on the road: even the most careful driver with time on the surface of the car appear mechanical damage.





Caught on the road a small pebble can result in a crack on the windshield, terribly annoying and disturbing to enjoy driving. Of course, it is possible to cope not with all mechanical injuries. But cracks in the windshield can be completely resolved on its hands.





A crack on the glass avtomobilebi the appearance of cracks on the windshield is particularly important as early as possible to begin repairsto it is not "crawled" on.

You need

• photopolymer adhesive
• the injector (metal or plastic)
• liquid for degreasing and surface wipes
• electric drill
• air pump
• applicator
• scraper
• UV lamp
• Polish

How to seal glass

1. Carefully wipe the glass with a clean cloth. To remove all dust, use the air pump, then obesity surface using acetone or alcohol.
   
   
   
2. Clean the edges of the cracks with a scraper.
3. To weaken the glass, at a distance of 2 mm from the end of the crack (both sides or at the end of each branch) using the previous hole electric drill. After that, clicking on a chip, Dodai crack to holes.
   
   
   
4. Attach by means of special applicators on the surface of the glass injector. To circles tightly against the glass, smear them with vaseline. The injector must be perpendicular to the glass directly over Viserbella or crack. Now you can pour photopolymer adhesive.
   
   
   
5. Take off the injector only after the complete infusion of the adhesive. Self-adhesive will dry in approximately 48 hours. To shorten the drying time 3 times can, utilizing an ultraviolet lamp.
   
   
   
6. After the glue has dried Polish the surface with a special Polish for glass.