Foglights with their hands

How to fix a fog lamp on your car.



We need a broken lamp:

Remove the remnants of the old glass and old sealant as possible.

Next we are measuring the diameter of the headlights and select a suitable diameter glass jar or bottle. I almost perfectly
came the usual three-liter jar. I do not think at this point there can be problems - store shelves abound container
any volumes, shapes and colors!

Now, we take a glass cutter and outlines a line near the bottom of the can


Of course it is impossible to break off the glass by incised lines, especially if you draw it in such a shitty glass cutter that was me.
Therefore, at the same time we do 2 things: put the kettle boiled and put a jar in the refrigerator
(to rapidly cool it, I filled it with water from a well)

Take a cold jar, hot kettle and pour the boiling water into the jar


As soon as we hear the crackle glass. Result - will fall off the bottom of the banks


As I said, I had a glass cutter at the shit, so do not fucking split off the bottom of a flat incised lines,
but it does not matter - Remove unnecessary projections using the same glass cutter and pliers (unfortunately the process was filmed).

Then we put in the groove of the housing fog sealant


Insert glass


Outside sealant also passes


And evenly flatten it


That's what we've got! Left to dry


When the sealant is dry, install the finished fog in place. Guess which side of the glass after market?