Auto air conditioning and refrigerator with their own hands

Here, too, I have recently decided to make some sort of kondishina in cars. I get a good thermo and which can be used as a refrigerator (close air holes), and air conditioning. Refrigerator cold holding two days of stalemate ice begins to melt, air conditioning day. From the materials used Isocaptivity 20 mm thick, the remains of plastic panels, adhesive tape, adhesive tape aluminum, screws, cardboard boxes, fans of the computer power supply. As the cold akkamuljatora use 4 half-liter butylkis frozen water (you can buy in Magazev akkamulyator cold, but they do not sense a lot more)

Carton as a basis





Aluminium scotch tape and 20 mm Isocaptivity



Paving the box inside izoplenom, aluminum inside to get the likeness thermos.



Angles sizing aluminum tape



To improve heat izolyauii between the walls of the box and izoplenom can put several layers of newspaper



The ends can be made of two-layer, such as there will be fans.



For external use the remnants of the plastic frame wall panels



Frame collected a little more carton



To design was more reliable shook all the tape, a lot of scotch!



Set a cardboard box inside a plastic frame.



Knife to cut a hole for the fan. On the one hand the fan runs at blowing the other blow-out.



Installation of fans using long screws.



The finished design with akkamulyator cold cover cut out of izzoplena (2 pieces for a more reliable seal). Kryglyashki remaining after cutting holes ventilyatoroy can be used as plugs for tchoby use design as a refrigerator. It consumes very little energy.



Source: ">