As we have gates at the cottage zapilivaem





Theme, inspired by the recent post "As we washed down the door to the cottage." We tried this summer, too, and washed down the gate. A couple of years ago bought the land on which the old house and the old gates, which are subject to demolition.

And if the house could still suffer another year or two, the old gate had to carry it now, as was the need to travel to the site of large-size excavator to dig a septic tank.

Before you tear down the gates, it was decided to make a new, but thoroughly. So the gallery is 31 pcs.

As we have gates at the cottage zapilivaem



02 - First three square column supports for gates and wickets. Poles into the ground Meter + general raft foundation.

As we have gates at the cottage zapilivaem

03 - Rostwerk reinforced reinforcement rods 4, boil all of science.

As we have gates at the cottage zapilivaem

04 - The underground part of the pre-primed in order to avoid corrosion.

As we have gates at the cottage zapilivaem

05 - Welding centered formwork length rods are not enough.

As we have gates at the cottage zapilivaem

06

As we have gates at the cottage zapilivaem

07 - Getting to fill.

As we have gates at the cottage zapilivaem

08

As we have gates at the cottage zapilivaem

09

As we have gates at the cottage zapilivaem

10

As we have gates at the cottage zapilivaem

11

As we have gates at the cottage zapilivaem

12

As we have gates at the cottage zapilivaem

13 - After drying, the raft foundation, gruntuem until the end of poles, grind a 0 and a hammer paint brown paint to make the "factory" look. The hinges were welded in, bought separately, inside - steel ball, photo no.

As we have gates at the cottage zapilivaem

14 - The welding process itself Vorotina. Two beams at the edges, one above and one below. Then - intermediate. All together boil, made two cuts in the middle of grinder, top and bottom.

As we have gates at the cottage zapilivaem

15 - In parallel with the gate built temporary fence. In the fall there will be a garage and a beautiful fence.

As we have gates at the cottage zapilivaem

16 - Put the gate to the ground, thoroughly boil all seams.

As we have gates at the cottage zapilivaem

17

As we have gates at the cottage zapilivaem

18

As we have gates at the cottage zapilivaem

19 - After the cut from above and below - the gates open.

As we have gates at the cottage zapilivaem

20 - Remove, grind joints gruntuem, grind the surface and coloring.

As we have gates at the cottage zapilivaem

21 - Imitation timber is fitted in place, and then reams and mounted in furniture bolted to the base with a locknut Vorotina.

As we have gates at the cottage zapilivaem

22 - The same procedure with a wicket, and later painted wood.

As we have gates at the cottage zapilivaem

23 - Gate Bolts are inserted into the pre-drilled hole in concrete.

As we have gates at the cottage zapilivaem

24 - The gate is no lock.

As we have gates at the cottage zapilivaem

25 - View from inside. (Quality - sorry).

As we have gates at the cottage zapilivaem

26 - start to understand the old gates. They are about 80 years old. Stood to the same amount.

As we have gates at the cottage zapilivaem

27 - The final form of the inside.

As we have gates at the cottage zapilivaem

28 - The same - on the outside.

As we have gates at the cottage zapilivaem

29

As we have gates at the cottage zapilivaem

30

As we have gates at the cottage zapilivaem

31

Posted in [mergetime] 1377088958 [/ mergetime]
I have all the kick.

As we have gates at the cottage zapilivaem

Source: ">