Now I know what I will do from your old sweaters ... This warm little thing - just a godsend!

All lovers of handicrafts and create unusual things from simple materials, we offer one more tempting idea ... Stitch slippers from unnecessary sweater - easy and simple. If you are keen on crafts and want to do something original and, above all, useful - you are on the right track

«Website» offers you an interesting solution is to make the home < not feel cold feet
How to make slippers from old svitera



You need
unnecessary sweater li > felts (20 cm to 30 cm) or finished insoles cardboard sheet of A4 pencil scissors double-sided adhesive feed needle and thread tailor's chalk sewing machine

Progress
It is cheaper and easier to buy ready-made insoles. But, if that is possible to make them easily from felt. To start circle the contours of the feet on cardboard.



Then engrave the pattern of cardboard.



As you can see, the future course of operation is very simple!



You will need 4 identical insoles.



Then in the course is a sweater! Bring your patterns on knitted fabric, but do not forget to indent approximately 3 cm. 2 Circle the same circuit, then engrave the lines.



Affix double-sided tape to the first insole and attach it to the front side of the fabric.



Do the same with the other insole and attach it to the wrong side of the fabric. It is necessary that the edges of the felt soles maximum match.



Now you need to make insoles and cloth. This can be done manually, although the sewing machine still poberezhet your nerves and time!



Let us top sneakers! Othmer about 13 cm from the cuff of a sleeve, and cut off. Sew up cuffs and rounded opposite side parts, as shown in the figure.











Now you have a piece of knitted fabric sewn on both sides of the cap and insoles. And there should be two pieces! So to finish and get to the fun part - linking fragments!



Put your cap, it is the future top of slipper on the front of the top of the sewn insole. Its tip must coincide with the center of the rounded part. Gillette detail at this point.



Next you need to move the top of the slipper 3 cm down and sew together the corners of the items in the area of ​​the cuff and the sides of the knitted fabric with insoles. Make a few stitches, as shown in the photo.



Sew both parts round, moving from left to right at the same time and uniformly taking place in the excess fabric around the insoles. Thanks already made stitches, it will be easy to do.






Remove the resulting structure to all seams remained inside the sneaker, and make two cuts on both sides of the heel. It is necessary that cuts ended a few millimeters from the insole.



To make the heel slippers is necessary to form them from the three tissue sections. Then sew detail - should have two vertical seam.







Finally - flaps slippers! Gather at the bottom edge of the sweater. Raw edge wrap such that the band width was about 5 cm. Cut it into two parts. Stick adhesive tape, as shown in the photo. The resulting knitted tape wrap around the slipper, glue and fasten with stitches. The same has done with the second tape. Done!



That's so cute slippers obtained!





Now your feet warm! Giving new life to an old sweater you own hands fashioned sweet and warm home footwear.

Or maybe your friends also do not mind make slippers ? So share with them this wonderful idea!

Tags

See also

New and interesting