Case for smartphone from old jeans

Jeans loved by all. Well, almost everything. And the old couple lying around in the attic of jeans - someone is a favorite, pureed into holes pants, someone entirely new, unworn (because someone is slightly podnabrat thousand grams) - certainly there. Today I offer you not revolutionary, but rather curious idea of ​​how to usefully apply the old jeans. And do not feel sorry for them! Admit it already fairly, that they would still be lying dead load on the far shelf and would never have seen the light at the end of his life linen ...




I propose to be very bloodthirsty and put an eye on the steepest part of the jeans - leather label that is located on the back of his belt. At this stage, we need: a ruler, pen, pencil or marker, preferably sharp scissors.







Attach the label to the gadget to navigate on the necessary size of the case. It is important to remember that on both sides of labels need to lay additional space for buttons and seams. A piece of fabric cut should be about 25 cm long and 8 cm wide.







Now is the time to take branded tag. This can be a tag indicating the size or the garment care regulations. In any case, remove them with a seam ripper or scissors.







To nothing to fluff and not dispersed, cuts a piece of jeans to be treated - it's called overlozhit or neaten. You can do this manually, but you can entrust this work to the sewing machine, putting it on the appropriate mode.





Neaten edges case you need to sew up on one side. To look all neat and beautiful, turn the material inside out to him, fold in half so that the clash between the front face, make the seam on one of the sides. Try to sew as close to the edge, so as not to waste precious jeans.



After that, remove the cloth. Now you can start linking the other side. There will have to try, because the fabric is much thicker and may have difficulty with the passage of the needle therethrough. As a result, everything must happen as in the photo ...













To protect your gadget from the loss of our case study, it is necessary to provide closure. You can sew along the edge of the usual button (or a button). But they are quite tight opening and closing, which is not convenient. I would like to get a player or phone from the case could be one left.

So use Sew (secret) key. Sew on two buttons - so it will be convenient and secure.







Done! The beauty of this case study is that it can be used:



A) as a conventional storage case, carry and protect the gadget from damage:











B) to carry the gadget on the belt due to the presence on the back side of the case hinges, which allows you to thread the belt through it:







Source: 24gadget.ru