Frequent failures of washing machines

Washing machines are quite capricious household appliances. Often there are program errors, wear of structural elements, mechanical breakdown of parts. Consider the most common defects and ways to eliminate them.

It is not necessary that the spare parts for the washing machine were ordered by the master. You can buy it yourself and bring it to replace it. In most cases, it will be much cheaper. The process of purchasing an inexpensive spare part can be expressed in the following stages:

1. Choosing a store for purchase in accordance with positive customer feedback on specialized forums and social networks;
2. Introduction to the search form of the model of the washing machine, selection of category with a part, finding the necessary part for replacement;
3. Sending the product to the cart, entering personal and contact details, making a purchase, choosing a delivery method;
4. Receiving spare parts at the warehouse of the transport company or at the hands of a courier.
5. 5. Check compatibility with the washing machine and the presence of mechanical defects.

The most common breakdowns in washing machines
In washing machines, the following breakdowns are most common:

• software errors in the control module, you need to restart the operating system or download new drivers;
• the failed control model, in this case it is necessary to remove the module and replace it with a new one, loading data automatically from the memory card, loading drivers is not required;
• leakage of the hose due to destruction due to increased alkalinity of water or mechanical factors, it is necessary to disconnect and replace with a new one with adhesion of a sealing gasket from rubber at the joints;
• burnout of the electric motor due to prolonged operation without stopping, a new copper winding or complete replacement is required;
• inoperability of mechanical control buttons, it is necessary to install new springs;
• mechanical damage to the drum;
• leakage between the body and the lid in the drum, the reason is the sealing rubber part.

Independent repair or referral to specialists
Repairing a washing machine is difficult enough. A person without experience will worry, the risk of improper connection of poles, plugs and short circuit with defects with the need for expensive repairs in the future is high. It is better not to take risks and call a specialist. The process is simple, you need to apply to the service with an address and indicate the problem. After meeting the master. Pre-analyze reviews in the network to exclude getting to scammers.