Why put soda in the washing machine tray?

A really good housewife should be clean everywhere. The washing machine is no exception to the rule. It should be carefully aired after each wash, wiped and do not forget to clean all filters.

The washing machine tray also needs care. About that, How to clean the washing machine trayWe will explain in detail in this article.





Why is cleaning the tray so important? The fact is that water does not completely wash out the powder and air conditioner. Their remains are mixed and form unsightly dirt, which dries on the plastic. Over time, the situation becomes even worse, because the dried-up plaque only accumulates.





There may also be traces of rust. They are eaten into the surface, so you need to get rid of them immediately. Especially for you, we have prepared a small instruction that will help to quickly cope with pollution.





How to Clean a Powder and Air Conditioning Tray
  1. To cleanse you will need dark soap, soda and hydrogen peroxide.



  2. In a container of plastic pour 50 ml of peroxide. Add 3 tbsp of soda. A piece of soap was finely cut with a knife and rash to the rest of the components.



  3. Now you need to mix everything thoroughly so that the soap completely dissolves and a thick foam is formed.



  4. If you don't know, How to remove the washing machine trayBe sure to read the instructions. Usually it is necessary to push the tray to the point and slightly press on the air conditioning compartment.



  5. Place the tray in the pelvis and apply the foam mixture to the entire surface, paying special attention to the yellowed areas.
  6. After half an hour, you will be able to quickly and easily clean all contaminants, as well as rust stains.





Be sure to take care of your equipment, especially the vacuum cleaner, washing machine and refrigerator. It is thanks to careful cleaning and ventilation that your technique will serve you for a long time, and its work will be of high quality.