Practical guide to finishing corners in the house Bashny.Net

Finishing the corners in the apartment is a necessity. Especially if there are small children or animals in the house. It costs them nothing to damage the plaster.

Most often, it is not internal, but external corners that are easier to reach. Caring owners finish them with material that strengthens and decorates them. Basically they use metal, plastic, wood, decorative stone.

The work begins with leveling the angle. Further, a PVC corner is installed on flat walls using mounting glue for plastic, and already on top of it the main finishing material.





The corner in the apartment First you need to check how curved the angle. Based on the measurement results, it is possible to determine the width of the corner. The smoother the angle, the narrower the corner can be. Inexperienced people are better off using middle corners.

Plastic corners are fixed as follows. The angle deviation is measured. From a dry putty mixture, a solution is made, which gives the angle a rectangular appearance. After drying, a plastic corner is applied to the corner. Then it is covered with a finishing putty and polished.



DepositPhotos

Also, glue is used instead of putty. Dottedly applied to the inside of the corner with intervals between strokes of 3-5 cm. Or liquid nails. As an additional tool, construction tape can be used.

Metal corners are the most durable, durable, but give the wall a somewhat monumental look. Wood is the most environmentally friendly. They can be beautifully designed with carving or burning. At the same time, they are most sensitive to high humidity, temperature changes, scratches.



DepositPhotos

Styrofoam is resistant to fire, dirt, temperature changes, moisture. It can be painted and decorated beautifully. He's hooked on acrylic sealant.



DepositPhotos

Decorative stone is light enough and has a smooth surface, it can be used even at uneven corners without prior preparation. It's attached to tile glue.

Before installing the corners, the surface of the wall is ground and moistened. Diluted 2 hours before fastening, the glue is applied to the back of the stone and to the wall itself. The correctness of the landing of the stone is checked using a level or plumb.





With the help of drywall, you can level any surface, this is its dignity. There are two ways to fix it. Frameless, in which a sheet of material is applied to the surface of the wall and marking is made on each side of the corner. With a knife, blanks are cut, and bevels are made with a rubank on the docked parts for a tight fit. Then the sheets of drywall are fastened using mounting foam.





DepositPhotos The frame method is used in the presence of a large curvature. The angle deviations are measured. With the help of galvanized metal profiles, dowels and screws, a frame is installed. And on top are sheets of drywall with screws. Their surface is sealed and polished. Sometimes a perforated net is also attached to the material before putty.





DepositPhotos Finishing corners in the apartment It is not easy, but necessary. Decorative corners in the apartment They decorate the home, change the visual perception of the space and make it more presentable.





DepositPhotos About how to make a budget repair apartment, without making mistakes, read in our next articles. Follow the links.