I found mold in the washing machine, but I couldn’t wash it away with tears. Bashny.Net

Every home appliance needs care. Especially if it's a washing machine. After all, the humid environment creates favorable conditions for the development of fungus and mold. Subsequently, this affects the quality of washing, smell and cleanliness of things. Well, today we're going to tell you what's right. clean the washing machine at hometo remove all contamination.



Of course, it is better to monitor the cleanliness of household appliances and prevent strong contamination. But if your washing machine hasn't been cleaned in a long time, I got some mold.This problem can be solved. This will help us high temperature and simple tools that are found in almost all homes.



First stage

1. First we have to put an empty machine on the longest program, but free-washing. The fact is that during the pre-washing, all the funds that we pour inside for cleaning will simply go to the sewer.
2. The main remedy that we will use to get rid of mold is chlorine. We'll need it. litre.
3. First set the water temperature of 90 ° C and start laundry. The water level should be as high as possible so that everything is properly washed out. If your machine uses water sparingly, you can add more through the powder receiver.
4. A couple of minutes after the washing began, pour whiteness into the powder department. For greater efficiency, you can remove the powder receiver to get into the filler as much as possible. So we'll wash it all over the surface.
   
   
   © Freepik
5. Chlorine should be poured after some time after the start of washing. After all, if we pour bleach at the very beginning, it will immediately be washed away with water. And we need to keep the chlorine on the pipe longer.
6. Follow the washing process further. You need to catch the moment when the machine heats the water to the maximum temperature. At this point, she needs it. pause or turn off. Leave the car with water and chlorine for a few hours.
7. Important: the apartment will have a rather pungent smell of bleach, so you will need to ventilate the room well.

Second phase

1. After a few hours, we start the machine again and wait for the washing to finish. After that, we start another laundry cycle, only at 40 ° C.
2. So that the mold does not have any chance of survival, during the second cycle we use another tool - 9% vinegar. Through the powder receiver, pour 2-3 glasses of vinegar into the car.
   
   
   
3. After all these procedures, you need to start another 1-2 laundry cycles to get rid of the smell of washing and wash the car well from the residues of funds.
4. From the folds of gum, the remains of dirt and mold will have to manually. They won't wash themselves completely.

If the machine has not been cleaned for a long time, and there is a lot of mold in it, then The above procedures should be performed more than once.. It is unlikely that serious pollution will be eliminated the first time. Re-treatment can be carried out in a few days. If the case is particularly neglected, then it is better to take the machine to the workshop, disassemble and thoroughly wash everything.

In order not to have to carry out such manipulations, it is better not to create favorable conditions for the development of mold. It means that The machine must be kept dry. - wipe after washing the drum, powder receiver and fold of rubber. It is also advisable to wash at least once a month at a temperature of 90 ° C. If there are no things to wash in hot water, just run an empty car. High temperatures will keep mold spores from occupying your home assistant.



© Freepik What you can not clean the washing machine Also want to remind you by what means Under no circumstances should the washing machine be cleaned.. The following substances can cause serious damage.

1. Means for cleaning pipes "Mole". It's too aggressive.Not intended for washing machines. Its use can even be detrimental to health, as some of the substance will remain on clothing.
2. Coca-Cola. This well-known drink often appears as a universal cleanser. Indeed, the phosphoric acid found in Coca-Cola can corrode dirt and scale. But in the composition of the drink there are other substances that can negatively affect the components of the machine.
   
   
   
3. Sand and sugar. Yes, some people use such tools in order to get rid of scale. But it's all good. get inside It's bad for the quality of the laundry. And soon the device will completely stop working, and it will have to be disassembled.

about:blank

We also recommend an article on what things can not be washed in a typewriter. They can also cause a breakdown.

If you know other safe ways to clean the washing machine at home, be sure to share in the comments!