And I wanted to put the old chairs on the wood... Look, what a wonderful idea!
Bashny.Net
What a pity to give up sometimes, with a cute heart things, whether it be a favourite sweater or a couple of my grandmother's old chairs. After all, much more pleasant and anxious to try to restore old things and breathe new life into them than just throw it in the dustbin.
If you inherited a couple of old chairs, the editors have "Site" have some good ideas how to transform them to good use!
Bench from old chairs
To make a similar piece of furniture with your own hands is not difficult!
You need
3 old chairs of the same height (preferably)
a piece of plywood with a length of 1.5–2 m
drill and drill bits
hacksaw
sandpaper
paint spray
screws and screwdriver
stapler for furniture
soft filling for the seat
upholstery fabric
Take off the old seats from the chairs and put them in a row. Measure the overall width and add to it 10 see the Drilled hole where it will be mounted a sheet of plywood.
Salifou the surface of the chairs and fit them with the necessary paint. Follow the tips for using paint specified by the manufacturer.
Put chairs in a line, leaving between them of 5 cm Put a sheet of plywood on the chairs and mark the place for the future of fastening screws. In the marked places drilled holes.
With a stencil paint on a sheet of plywood, the corners of the future of the seat and on the specified lines had a form.
A piece of filler, which is a few inches larger than the size of the Board, fasten the latter with a furniture stapler.
Also fasten upholstery fabric, adding 10 cm ACC on each side.
You only have to screw the screws and voila — a chic banquette is ready!
The original shop
This bench will look great in the hallway and in the garden. And to make it easier to nowhere!