Repairs in practice: how to lay parquet on the wall Bashny.Net

Wall decoration flooring is not a luxury, and a spectacular way to show your originality and good taste. Tell how to make a crate than to mount the dies and how not to be mistaken with finishing

When bored with the usual Wallpaper, decorative plaster ceased to impress, come to the aid of he — parquet walls. Why not come up with designers to use a favorite material as often as possible. Indeed, the use of parquet boards on vertical surfaces — bold and unconventional way to decorate and surprise guests.


Besides the visual effect, the use of parquet on the walls justified from the practical side. It improves sound insulation and provides additional insulation of the premises. Sounds tempting? Tell how quickly and effortlessly lay parquet on the wall at home. 1. Select the material

If you decide to draw one or more walls with flooring, first select a material — a laminate, parquet Board or batch. The laminate has a drawback — it is difficult to cut neatly. In the process, the polymer breaks down the top layer and get the chips — they will have to mask to make it look neat.

If you are new to this task, choose a wooden dice — it is easier to work with. You can buy individual dies or a ready-made shields made from high-quality wood. If your goal is an interesting pattern on the wall, use parquet. It is necessary to buy with a margin of about 10% — they will go to trim and fit.

Before installation, soak the material in the room where it will be used within 2-3 days. Unzip it and place on a horizontal surface.



 

2. Prepare the surface

Before you start to decorate the wall of a parquet Board or laminate, carefully prepare the surface. It is possible to align it with plywood, drywall, particleboard. Or just align and stukatura the wall completely.

Most often as the basis for wall flooring used wooden crate of bars with a thickness of 30-40 mm, which krepjat to a wall on the distance of 35-40 cm from each other.

If you plan to lay the flooring horizontally, make vertical purlin and Vice versa. If the installation will produce on the diagonal, then the crate should be attached diagonally, perpendicular to the direction of plating.





  3. Panel wall flooring

The wall, which is planned to cover the flooring must be completely dry. If there are water pipes or heating – make a vapor barrier.

Select a starting point and set the level. Here there are nuances: if the flooring is mounted horizontally – the starting point is the ceiling; in case of vertical installation work starting from the corner. If you are planning to cover only the lower part of the wall, begin the installation from the floor. In the case that will finish the whole wall – work starts from the top.

Attach the flooring to the sheathing using metal plates that are inserted into the grooves of the dies. This method of fastening protects the coating from deformation in the process of operation and conceals the cap screws. Start the installation of parquet on the left side. Their own plate and boards connect among themselves on the principle of "thorn-groove". To mount the die on the adhesive or clove – hammer them in lock connection. The adhesive is applied on the wall or on the Board.





4. Apply final touches

To give the edges of the parquet or laminate a neat appearance, they are usually covered with a skirting or special decorative panels. Install the corners and baseboards in those places where the walls join the floor and ceiling.

To remove scratches, chips and cracks that appeared during installation – treat them with putty for wood or wax. If you put the parquet in the room with high humidity, apply special tree oil – it will prevent the material from moisture and mold.

P. S. And remember, only by changing their consumption — together we change the world! © Join us at Facebook , Vkontakte, Odnoklassniki

 

Source: inmyroom.ru/posts/11287-remont-na-praktike-kak-ulozhit-parket-na-stenu