222
A few facts about interestnyh ICE
There will be 8 ph.
1) The shape of the piston!
It is not strictly cylindrical as it seems at first glance. Simply put, if viewed from the side - a form of barrel (usually) when viewed from above - an oval! This is due to the thermal expansion of the metal when heated. Nagrevavetsya piston during operation and becomes a regular shape. 2) Sometimes there are such things as "Fist of Friendship" This is when the piston rod or punch cylinder block and evaporate very far) to bend the connecting rods, etc. The reasons are many ... One of them sticks in to the maximum rake pump motor spins at unrealistic momentum and inertia forces as a result of "tearing to pieces»
3) or as
4) The most bolshimy marine engines are! And one of them, and its performance:
Bore - 960mm
Number of cylinders - 14
The volume of one cylinder - 1820 liters
Power - 108 920 hp
Maximum speed 102 r / min (at this size it is even a lot)
5) The pressure in the fuel system of a diesel engine can reach up to 2000 bar (modern engines) is due to the fact that diesel fuel injection occurs at the end of the compression stroke when the pressure in the cylinder is already quite a lot! By the way the first pump invented by Robert Bosch
6) One of the drawbacks of the engine maximum turnover limit! The maximum value of 20 - 26 thousand revolutions / min. More can not be physically ... At vysokooborotisty forced engine exhaust kollekora heated to red! (such as F1 car)
7) The maximum temperature of the working fluid (gas) in the combustion chamber reaches up to 2,000 degrees Celsius! How not to melt everything in the world? The fact that this temperature is cyclical, and the metal itself to a temperature not heated, it does not manage to be transmitted in full from the gas to the metal.
Source:
1) The shape of the piston!
It is not strictly cylindrical as it seems at first glance. Simply put, if viewed from the side - a form of barrel (usually) when viewed from above - an oval! This is due to the thermal expansion of the metal when heated. Nagrevavetsya piston during operation and becomes a regular shape. 2) Sometimes there are such things as "Fist of Friendship" This is when the piston rod or punch cylinder block and evaporate very far) to bend the connecting rods, etc. The reasons are many ... One of them sticks in to the maximum rake pump motor spins at unrealistic momentum and inertia forces as a result of "tearing to pieces»
3) or as
4) The most bolshimy marine engines are! And one of them, and its performance:
Bore - 960mm
Number of cylinders - 14
The volume of one cylinder - 1820 liters
Power - 108 920 hp
Maximum speed 102 r / min (at this size it is even a lot)
5) The pressure in the fuel system of a diesel engine can reach up to 2000 bar (modern engines) is due to the fact that diesel fuel injection occurs at the end of the compression stroke when the pressure in the cylinder is already quite a lot! By the way the first pump invented by Robert Bosch
6) One of the drawbacks of the engine maximum turnover limit! The maximum value of 20 - 26 thousand revolutions / min. More can not be physically ... At vysokooborotisty forced engine exhaust kollekora heated to red! (such as F1 car)
7) The maximum temperature of the working fluid (gas) in the combustion chamber reaches up to 2,000 degrees Celsius! How not to melt everything in the world? The fact that this temperature is cyclical, and the metal itself to a temperature not heated, it does not manage to be transmitted in full from the gas to the metal.
Source:
