550
Modding five points! (12 photos)
This smiley guy named Justin, clearly outplayed in Unreal Tournament, as its computer PainMaster 5000 is made in the form of weapons from the game.
02
It is notable for its minimalist, in fact, it's just a cardboard box, but maintained the style of the glory: Again and again modders demonstrate to us that there are no limits to their imagination and the possibilities of transformation of buildings for personal computers.
... Michigan Don Soules modder created for your home computer casing in the form of a robot fur Atlas.
This brilliant and sexy motorcycle is actually a body for internal PC. According to its creator, the bike used to be just a toy. After modding it again painted, equipped with headlamps and has attached an exhaust pipe.
he first phase of the competition SLI - Machine: Double Fast and the Furious successfully completed and it is time to take stock. In the contest brought a lot of work and 3 D -models, but unfortunately, not all of them comply with the conditions of competition. After lengthy discussions, the seats were distributed as follows:
1st place
Author: Denis Ilyin
Project Name: SLI Wheel
Project description: "Drive on the Porsche Cayenne R18
Tire Bridgestone DUELER H / P Sport 255 x55 R18
Homemade water cooling system based on the Component TopMods.NET
The power supply Favourite F1 460W
Motherboard form factor mATX
Two Yorshik Holder's playing the role of silencing »
06
07
08
4th
Author: Alexander Egorov
Project Name: Viper SLI Machine
Project Description:
"1. Recess holes 120mm fan (front) and remove the hard drive cage to install a fan.
2. The keying holes for 120mm fan (rear) and a slight change in casing design to install the fan.
3. The keying vozduhovvoda front panel (for the free passage of air) as a shield. Vozduhovvod barred grille, then it was glued to the head of the snake (cut from a different panel of the same body), we obtain the well-known logo of a sports car +
4. Installation and connection of illumination red duct \ logo.
5. The keying in the left side wall of windows, installation of Plexiglas.
6. The keying in the top cover of the window, the installation of plexiglass.
7. Reduction in the order of power wires, remove unnecessary ...
8. Installation of the V-engine (homemade model) with a fan and logos nvidia, symbolizing technology SLI (connection of two engine blocks).
9. Production and subsequent installation of lighting with connection legs to the body.
10. Replace plugs 5'25 on the grille with the logo nvidia.
11. Production (painting) inscriptions on the left side wall of Viper SLI Machine.
12. Production (painting) logo sports car in the form of a snake on the top cover.
13. Production (painting) of the two longitudinal stripes.
14. Production and installation of nvidia logo on the left side wall of the glass.
15. Production (painting) inscriptions 680hp, ambiguous inscription 1) chipset nForce 680i; 2) horsepower of the sports car (not a lot of overpriced, but it's tuning).
16. Installation and connection of lighting green nvidia logo on the front.
17. Installation and connection of lighting green nvidia logo on the left side panel.
18. Install the muffler on the power supply. »
09
10
3rd place:
Author: Gorshkov Anton
Project Name: SLI-CUBE
Project Description: The "Total constructive is the two-modular design with rear access by withholding carrier structural frame of the common block. On the base frame secured all boards, power supply and hard drives. Total unit bears the decorations, lights and fan.
Full bush acrylic (transparent and red) and white PVC plastic. Under the basic framework uses a standard panel under the motherboard hardware video cards and hard drives. Front cooler tucked behind protruding grip that works as well as the protective grill and shupopdavitel.Podsvetka svetokulera made of two 31cm backlight. Background backlight obtained due transparent rear and bottom walls. Coolant maximally reduced in size, but though represents only one fan, but the air flow is divided into two streams, one of which goes into the space between the CPU and GPU (s blowing through them), and a hard drive with access through the power supply. "
11
12
Source:
02
It is notable for its minimalist, in fact, it's just a cardboard box, but maintained the style of the glory: Again and again modders demonstrate to us that there are no limits to their imagination and the possibilities of transformation of buildings for personal computers.
... Michigan Don Soules modder created for your home computer casing in the form of a robot fur Atlas.
This brilliant and sexy motorcycle is actually a body for internal PC. According to its creator, the bike used to be just a toy. After modding it again painted, equipped with headlamps and has attached an exhaust pipe.
he first phase of the competition SLI - Machine: Double Fast and the Furious successfully completed and it is time to take stock. In the contest brought a lot of work and 3 D -models, but unfortunately, not all of them comply with the conditions of competition. After lengthy discussions, the seats were distributed as follows:
1st place
Author: Denis Ilyin
Project Name: SLI Wheel
Project description: "Drive on the Porsche Cayenne R18
Tire Bridgestone DUELER H / P Sport 255 x55 R18
Homemade water cooling system based on the Component TopMods.NET
The power supply Favourite F1 460W
Motherboard form factor mATX
Two Yorshik Holder's playing the role of silencing »
06
07
08
4th
Author: Alexander Egorov
Project Name: Viper SLI Machine
Project Description:
"1. Recess holes 120mm fan (front) and remove the hard drive cage to install a fan.
2. The keying holes for 120mm fan (rear) and a slight change in casing design to install the fan.
3. The keying vozduhovvoda front panel (for the free passage of air) as a shield. Vozduhovvod barred grille, then it was glued to the head of the snake (cut from a different panel of the same body), we obtain the well-known logo of a sports car +
4. Installation and connection of illumination red duct \ logo.
5. The keying in the left side wall of windows, installation of Plexiglas.
6. The keying in the top cover of the window, the installation of plexiglass.
7. Reduction in the order of power wires, remove unnecessary ...
8. Installation of the V-engine (homemade model) with a fan and logos nvidia, symbolizing technology SLI (connection of two engine blocks).
9. Production and subsequent installation of lighting with connection legs to the body.
10. Replace plugs 5'25 on the grille with the logo nvidia.
11. Production (painting) inscriptions on the left side wall of Viper SLI Machine.
12. Production (painting) logo sports car in the form of a snake on the top cover.
13. Production (painting) of the two longitudinal stripes.
14. Production and installation of nvidia logo on the left side wall of the glass.
15. Production (painting) inscriptions 680hp, ambiguous inscription 1) chipset nForce 680i; 2) horsepower of the sports car (not a lot of overpriced, but it's tuning).
16. Installation and connection of lighting green nvidia logo on the front.
17. Installation and connection of lighting green nvidia logo on the left side panel.
18. Install the muffler on the power supply. »
09
10
3rd place:
Author: Gorshkov Anton
Project Name: SLI-CUBE
Project Description: The "Total constructive is the two-modular design with rear access by withholding carrier structural frame of the common block. On the base frame secured all boards, power supply and hard drives. Total unit bears the decorations, lights and fan.
Full bush acrylic (transparent and red) and white PVC plastic. Under the basic framework uses a standard panel under the motherboard hardware video cards and hard drives. Front cooler tucked behind protruding grip that works as well as the protective grill and shupopdavitel.Podsvetka svetokulera made of two 31cm backlight. Background backlight obtained due transparent rear and bottom walls. Coolant maximally reduced in size, but though represents only one fan, but the air flow is divided into two streams, one of which goes into the space between the CPU and GPU (s blowing through them), and a hard drive with access through the power supply. "
11
12
Source:
