550
Gift for February 14
A week ago, on the nose it was a celebration of St. Valentine, and after nemalochislennyh requests not grasp a certain object of the interior, it was decided to make an original gift of its own production.
Will 29 ph 1 video.
It all started with a sketch
Drawing on hardboard outline the future of glass and mirrors
We cut off the excess, customize, polishing and shipping patterns on glass production. There they affectionately call "ass" and "cheese»
Take More hardboard cheshem home and measure the angle of the walls. The house is old, everything is crooked, and I want beautiful. The photo preform is 90 degrees. As you can see on the meter 4 cm have
while doing a template for countertops, dismissed chipboard. rascherchivaem countertop templates, we add the desired radius
cut the fret a little more than you need
After the jigsaw are chipped, that gift is not quite gud =)
Fraser has held both need edge rovnenkie
same Makar, or rather a router, make templates radius on the table
It turns everything rovnenko relative wall course
Again we carry home to measure the result. without the aid will not do =)
The call to the glass industry: - "The cheese is ready!»
I took with tinted mirror glass - 4 mm, 4 mm and mirror- clear glass 2 mm. All the same pattern, that is the same. According to him cut a hole in the table a little smaller and a groove that glass was in the same level with the plane of the table
Recently the glass 2mm not climbed. just clicked here result
the underside of the groove also do a mirror, try on
Apart from the slot in the table, so that LED ribbon has not fallen off. Why this color ?, so what was the closest one dick is not visible. and he groove paint furniture putty
adhesive tape RGB, derive an end in the right place.
"Ass is ready!". Cut the substrate under the mirror is less than 5 centimeters along the contour
Besides the contour, LED adhesive tape, 2-sided tape, and firmly connect with mirror
We are putting it all in a bunch we carry home
remove the old screen battery, put the legs, cool shelves, hang the body of boxes
put a mirror on top of the table top, fasten
tinted glass insert, protective, hang a mirror-set, commuting backlight
once put box appears kote lazily sleeping on the couch before =)
shelves are screwed. see the place is no longer overcome
while fiddling with the stick somewhere poher several ph better. Well actually the overall look.
A little mistake with the number of photons. Give gifts to love each other =)
Thank you for attention! I have everything!
Source:
Will 29 ph 1 video.
It all started with a sketch
Drawing on hardboard outline the future of glass and mirrors
We cut off the excess, customize, polishing and shipping patterns on glass production. There they affectionately call "ass" and "cheese»
Take More hardboard cheshem home and measure the angle of the walls. The house is old, everything is crooked, and I want beautiful. The photo preform is 90 degrees. As you can see on the meter 4 cm have
while doing a template for countertops, dismissed chipboard. rascherchivaem countertop templates, we add the desired radius
cut the fret a little more than you need
After the jigsaw are chipped, that gift is not quite gud =)
Fraser has held both need edge rovnenkie
same Makar, or rather a router, make templates radius on the table
It turns everything rovnenko relative wall course
Again we carry home to measure the result. without the aid will not do =)
The call to the glass industry: - "The cheese is ready!»
I took with tinted mirror glass - 4 mm, 4 mm and mirror- clear glass 2 mm. All the same pattern, that is the same. According to him cut a hole in the table a little smaller and a groove that glass was in the same level with the plane of the table
Recently the glass 2mm not climbed. just clicked here result
the underside of the groove also do a mirror, try on
Apart from the slot in the table, so that LED ribbon has not fallen off. Why this color ?, so what was the closest one dick is not visible. and he groove paint furniture putty
adhesive tape RGB, derive an end in the right place.
"Ass is ready!". Cut the substrate under the mirror is less than 5 centimeters along the contour
Besides the contour, LED adhesive tape, 2-sided tape, and firmly connect with mirror
We are putting it all in a bunch we carry home
remove the old screen battery, put the legs, cool shelves, hang the body of boxes
put a mirror on top of the table top, fasten
tinted glass insert, protective, hang a mirror-set, commuting backlight
once put box appears kote lazily sleeping on the couch before =)
shelves are screwed. see the place is no longer overcome
while fiddling with the stick somewhere poher several ph better. Well actually the overall look.
A little mistake with the number of photons. Give gifts to love each other =)
Thank you for attention! I have everything!
Source:
