596
Gift to the 8 th March
delving into the theme of the policy and all Maidan, we began to forget about the simple pleasures, such as the next holiday is a wonderful Women's Day.
24 photos will
So, having seen enough in the internet articles about the mini garden in a light bulb, it was decided as a present to the 8th to make such.
To do this, first of all we need a very light, and the more the better.
Next, go to the sand pit their dogs sieved sand and earth
the result of
so as not to bring, along with earth and sand or some kaku, quietly, while nobody sees send this good rolled into the oven.
Meanwhile sooooo carefully cut away with the help of the Bulgarian part of the cap. and also sooooo carefully removed the insides of the lamp.
Next, we need a stand for our minisad. For one had found an old rack out of the stuffed, whether gopher, then, whether a particular zhivotinku (specifically do not remember), had to stand about whittling on woodwork, sanded and varnishing. the process was not convenient to take pictures.
in order to hide the remainder of the cap, lubricate it with glue and wrapped with several layers of jute rope
the second lamp
At one of the stands, it was decided to set the backlight (unfortunately hand still has not fully reached the shoulders so get sloppy). Take the LED, we eat it is going from usb port, so it took to install additional resistors.
drill holes on the stand, and at the bottom eynoy make cuts in order to pave the cord.
just drill a hole in the tree (fastened to screw and glue) that minimize the visibility of our reasons
sadim our flask glue dragon (he used it, since drying it becomes almost colorless)
By the time his father has made a second stand. It burns using Nichrome wire (alas, the manufacturing process is also not captured)
Just for greater stability of the flask was carved (drilled ???) hemisphere.
Just sadim flask glue, and begin the process of filling. out of construction paper to make a guide of soil (mixed sand and earth of 3 to 1)
That's actually the bulb already filled.
We continue to take our plants. Use the best plants are succulents, for not whimsical to watering them.
vyderem kaktusyatnitsy home with a couple of cacti and buy more Haworth (green garbage in the pan, if anything)
and in that moment, when I thought that the most difficult thing is over, I realized that I did not know Zen, because it fucking is not easy to dig through small holes (zaphat, stick, powder) plant.
Some time later, and a huge number of nerve cells get burned first result. besides cacti naphal tude more decorative stones (bought in the nearest flower shop).
similar work was carried out with the second bulb, simultaneously planting to zhabena gardener.
Check the backlight
Type the first
View second
Posted in [mergetime] 1394289820 [/ mergetime]
continue to take a bottle of champagne, a cake, and we go to congratulate our wonderful ladies with a wonderful spring holiday.
I do everything possible to kick)
Source:
24 photos will
So, having seen enough in the internet articles about the mini garden in a light bulb, it was decided as a present to the 8th to make such.
To do this, first of all we need a very light, and the more the better.
Next, go to the sand pit their dogs sieved sand and earth
the result of
so as not to bring, along with earth and sand or some kaku, quietly, while nobody sees send this good rolled into the oven.
Meanwhile sooooo carefully cut away with the help of the Bulgarian part of the cap. and also sooooo carefully removed the insides of the lamp.
Next, we need a stand for our minisad. For one had found an old rack out of the stuffed, whether gopher, then, whether a particular zhivotinku (specifically do not remember), had to stand about whittling on woodwork, sanded and varnishing. the process was not convenient to take pictures.
in order to hide the remainder of the cap, lubricate it with glue and wrapped with several layers of jute rope
the second lamp
At one of the stands, it was decided to set the backlight (unfortunately hand still has not fully reached the shoulders so get sloppy). Take the LED, we eat it is going from usb port, so it took to install additional resistors.
drill holes on the stand, and at the bottom eynoy make cuts in order to pave the cord.
just drill a hole in the tree (fastened to screw and glue) that minimize the visibility of our reasons
sadim our flask glue dragon (he used it, since drying it becomes almost colorless)
By the time his father has made a second stand. It burns using Nichrome wire (alas, the manufacturing process is also not captured)
Just for greater stability of the flask was carved (drilled ???) hemisphere.
Just sadim flask glue, and begin the process of filling. out of construction paper to make a guide of soil (mixed sand and earth of 3 to 1)
That's actually the bulb already filled.
We continue to take our plants. Use the best plants are succulents, for not whimsical to watering them.
vyderem kaktusyatnitsy home with a couple of cacti and buy more Haworth (green garbage in the pan, if anything)
and in that moment, when I thought that the most difficult thing is over, I realized that I did not know Zen, because it fucking is not easy to dig through small holes (zaphat, stick, powder) plant.
Some time later, and a huge number of nerve cells get burned first result. besides cacti naphal tude more decorative stones (bought in the nearest flower shop).
similar work was carried out with the second bulb, simultaneously planting to zhabena gardener.
Check the backlight
Type the first
View second
Posted in [mergetime] 1394289820 [/ mergetime]
continue to take a bottle of champagne, a cake, and we go to congratulate our wonderful ladies with a wonderful spring holiday.
I do everything possible to kick)
Source:
