Bashny.Net
Clean iron from scale is very easy! This practical way to return the radiant purity of your iron.
Bashny.Net
If the iron is dirty from the soot, stroking him - a real punishment. Suddenly, there are stains, spoiled clothing, bad trouble ... This really do not need. Use these tips and detailed a thorough cleaning of your ironing. Make it easy, in addition, iron and crystal clear favorite things are worth. Choose the method that you like and will now begin!
Use salt to clean the burn-on soleplate
1. Put on an ironing board cotton cloth or paper towels - one which you can then throw away without regret.
2. On the mound of cloth tablespoon coarse salt. Especially good method works with sea salt.
3. Turn the iron on maximum heat, completely off steam.
4. Surface of salt sprinkled with a towel, without strong pressure on the iron. This deposit from the soles stick on salt gradually cleared the surface of the iron to the glittering surface of the mirror.
The use of salt and vinegar to clean the carbon deposits on iron
1. The vinegar and salt in equal parts mixed in a saucepan and place over medium heat until dissolved salt. Vinegar should not boil. The smell of hot money, of course, not the most pleasant, but its cleaning properties are excellent.
2. Cool the mixture slightly, so that it did not burn your fingers. Using this method, it is better to protect your hands from vinegar rubber gloves. Old cloth soaked in a mixture, gently wipe the surface of the soleplate. If necessary, use a brush to get rid of stubborn stains themselves.
3. The brush should be soft, do not use metal bristles, which can scratch the surface, which subsequently make it more difficult ironing.
4. After cleaning cloth dipped in vinegar, wipe the surface to remove the detergent. After this, including iron, pat old cloth for final cleaning.
The use of chemical cleaning agents
1. Fully daring water from the iron.
2. Turn on the iron, put a control on the heating mode for cotton.
3. Take a thick cotton cloth, put it on the ironing board and put on it in the amount of detergent recommended in the operating instructions of the iron. Cleaning agents can be different: some of them are recommended to be applied to the fabric, the other - directly on the soleplate.
4. The iron with circular movements fabric coated with a detergent. Turn off the iron and wait for it to cool down. Check the cleanliness of the holes for the steam and the entire sole, if necessary prowess remains of dirt and detergent.
How to clean the holes for the steam to soleplate
1. To clean the holes for the steam necessary to moisten in the vinegar-salt solution or a cotton swab into the vinegar and inserting her every hole, scroll.
2. It removes interfering full uniform allocation couple dirt. After cleaning the holes need to remove remnants of vinegar by the same scroll through holes clean cotton swab.
Other ways to clean the soleplate
One of the popular methods - cleaning soda. Soda mixed with water to a paste-like consistency. It means to apply a cloth, then wipe it soleplate. After cleaning prowess remains of soda with a clean cloth.
Distilled water and vinegar in equal parts is poured into the tank of the iron. Then you need to heat the iron and turn pairs. Further, the need for a few minutes every stroke cotton cloth. The solution from the reservoir daring and sole with a clean towel.
Toothpaste also be used to clean the surface of the soleplate. A small amount of it applied to the surface, especially good smazh the most problematic areas. Then paste wipe with a clean cloth. Turn iron, heating and ironed them old cloth. That's it!
Let them stay at your house is always a clean and tidy! Tell your friends about these methods of cleaning the iron, such information would not want.
via takprosto cc
Use salt to clean the burn-on soleplate
1. Put on an ironing board cotton cloth or paper towels - one which you can then throw away without regret.
2. On the mound of cloth tablespoon coarse salt. Especially good method works with sea salt.
3. Turn the iron on maximum heat, completely off steam.
4. Surface of salt sprinkled with a towel, without strong pressure on the iron. This deposit from the soles stick on salt gradually cleared the surface of the iron to the glittering surface of the mirror.
The use of salt and vinegar to clean the carbon deposits on iron
1. The vinegar and salt in equal parts mixed in a saucepan and place over medium heat until dissolved salt. Vinegar should not boil. The smell of hot money, of course, not the most pleasant, but its cleaning properties are excellent.
2. Cool the mixture slightly, so that it did not burn your fingers. Using this method, it is better to protect your hands from vinegar rubber gloves. Old cloth soaked in a mixture, gently wipe the surface of the soleplate. If necessary, use a brush to get rid of stubborn stains themselves.
3. The brush should be soft, do not use metal bristles, which can scratch the surface, which subsequently make it more difficult ironing.
4. After cleaning cloth dipped in vinegar, wipe the surface to remove the detergent. After this, including iron, pat old cloth for final cleaning.
The use of chemical cleaning agents
1. Fully daring water from the iron.
2. Turn on the iron, put a control on the heating mode for cotton.
3. Take a thick cotton cloth, put it on the ironing board and put on it in the amount of detergent recommended in the operating instructions of the iron. Cleaning agents can be different: some of them are recommended to be applied to the fabric, the other - directly on the soleplate.
4. The iron with circular movements fabric coated with a detergent. Turn off the iron and wait for it to cool down. Check the cleanliness of the holes for the steam and the entire sole, if necessary prowess remains of dirt and detergent.
How to clean the holes for the steam to soleplate
1. To clean the holes for the steam necessary to moisten in the vinegar-salt solution or a cotton swab into the vinegar and inserting her every hole, scroll.
2. It removes interfering full uniform allocation couple dirt. After cleaning the holes need to remove remnants of vinegar by the same scroll through holes clean cotton swab.
Other ways to clean the soleplate
One of the popular methods - cleaning soda. Soda mixed with water to a paste-like consistency. It means to apply a cloth, then wipe it soleplate. After cleaning prowess remains of soda with a clean cloth.
Distilled water and vinegar in equal parts is poured into the tank of the iron. Then you need to heat the iron and turn pairs. Further, the need for a few minutes every stroke cotton cloth. The solution from the reservoir daring and sole with a clean towel.
Toothpaste also be used to clean the surface of the soleplate. A small amount of it applied to the surface, especially good smazh the most problematic areas. Then paste wipe with a clean cloth. Turn iron, heating and ironed them old cloth. That's it!
Let them stay at your house is always a clean and tidy! Tell your friends about these methods of cleaning the iron, such information would not want.
via takprosto cc
Tags
See also
The easiest and most effective way to cleanse the lymph: the syrup of licorice and "Enterosgel".
How to get rid of moths in the kitchen forever
FASCISM is very simple -
7 simple and effective way to clean the enlarged pores. Porcelain skin is guaranteed!
Prepare "Raffaello" home! Very simple recipe of cream, taste is familiar from childhood.
Find out how to treat a cold in India. Effective and very simple recipes!
Boris Strugatsky: Fascism is very simple. Epidemiological Bulletin
11 simple and effective ways to solve everyday problems
Life, surprisingly, is a very simple thing
