Laying pavers on their own Bashny.Net

We decided with the future father to put the gazebo, but for this we need to increase the area under the paving stones of its foundation. It took us 20 sq.m pavers, 2 cubes of crushed stone, sand 2 cubes, 2 bags of cement, wheelbarrow, shovel, rake and tamping machine.

Will be 14 photos

1) It all began





2) Remove the turf + - 21 cm, with a rate of 10 cm of crushed stone, sand and 5 cm 6 cm pavers.



3) ramming the ground. Tamping took the rental shop in the building.



4) Stela geotextile weed.



5) delivery and flatten rubble.



6) ramming.



7) After the sand goes, as it ramming.



8) Start the process of laying. Arrange the two metal, 2 m pipe on a level, pour sand, pull rule to these tubes and get a flat surface.



9) the pavers tend to put a ladder.



10)



11) Put the paving, made trimming the edges. Now we need to sweep the dry sand between the stones, and after a walk through the rammer, it should be done at least 2 times until you can see the slots.



12) To strengthen the edges of the solution.



13) You can dance!



14) As a result

Posted in [mergetime] 1372711300 [/ mergetime]



Source: